Materials Science News

RSS

Global Solar PV Wafer Market Forecast to Reach $16,263 Million by 2017

Research and Markets has announced the addition of the "Growth Opportunities in Global Solar Photovoltaics Wafer Market 2012-2017: Trends, Forecasts and Opportunity Analysis" report to their offering.

From Research and Markets 24 May 2013

WAS’ ICP-OES Methodology Provides Simultaneous Qualitative Determination

A new analytical service note from Warwick Analytical Service (WAS) describes proprietary ICP-OES methodology developed by the company enabling them to provide simultaneous qualitative determination of up to 67 elements* in a single, cost effective measurement.

24 May 2013

Update on Carbon Fibre by Smithers Rapra

Carbon fibre is the most preferred lightweight manufacturing material, and is increasingly becoming the material of choice for manufacturers around the world. Its high tensile strength, low weight and low thermal expansi...

From Smithers Rapra Technology Ltd 23 May 2013

IDTechEx Launch Online Browser-based Market Intelligence Portal

IDTechEx has recently launched an online browser-based Market Intelligence Portal bringing you in-depth market intelligence and independent analysis throughout the year. Subscription to our Market Intelligence Portal ...

From IDTechEx 23 May 2013

TECHJET Named 2012 International Distributor of the Year By Jet Edge

TECHJET recognized as Jet Edge's 2012 International Distributor of the Year for outstanding promotion of ultra-high pressure waterjet systems in Eastern Europe.

From Jet Edge Waterjet Systems 23 May 2013

Plansee to Present Advanced Standard Spare Parts at Semicon West

All along the beam line there is plenty of potential for increasing the lifetime of consumables and simplifying their installation and replacement.

From PLANSEE 23 May 2013

Survey Copter Successfully Using Stratasys' 3D Printing Technology for UAV Systems

Stratasys Ltd., a leading manufacturer of 3D printers and production systems for prototyping and manufacturing, has announced that remote control systems manufacturer, Survey Copter, is successfully using its 3D printing technology to produce prototype and short-run component parts for mini-unmanned aerial vehicle (UAV) systems, also known as drones.

From Stratasys Ltd. 23 May 2013

European Crown and Bridge Market to be Driven by CAD/CAM All-Ceramic Restorations

According to Millennium Research Group (MRG), the global authority on medical technology market intelligence, the European crown and bridge market will be driven primarily by the rapid uptake of computer-aided design/computer-aided manufacturing (CAD/CAM) all-ceramic restorations due to their superior aesthetics and better fit for patients.

23 May 2013

New Report on Adhesive, Sealants, Epoxy Putty & Construction Chemicals Market in India

Research and Markets has announced the addition of the "Opportunity in the Household Products (Adhesive, Sealants, Epoxy Putty & Construction Chemicals) Market in India 2013" report to their offering.

From Research and Markets 23 May 2013

Sciaky Partners with EVOBEAM for Electron Beam Welding Systems

Sciaky, Inc., Leading Provider of Large-scale EB Welding Systems and Additive Manufacturing Solutions, Enters Partnership with EVOBEAM GmbH, Leading Provider of Small-scale, High-volume EB Welding Systems

From Sciaky, Inc. 23 May 2013

New Onboard Navigation Simulator to be Unveiled at CANSEC 2013

A new onboard navigation simulator that allows operators to train with the system they will use at sea will be unveiled at the CANSEC 2013 Defense and Security Exposition, May 29-30, in Ottawa, Canada. Raytheon Anschuetz, a German based, indirect, wholly-owned subsidiary of Raytheon Company, developed the embedded, simulation-based training system in partnership with Canadian-based Virtual Marine Technology (VMT) to enhance the realism and effectiveness of training offered to operators of Anschuetz's Integrated Navigation System.

23 May 2013

NASA's Innovative Advanced Concepts Program Seeks Phase II Proposals for Promising Studies

NASA is looking for far-out ideas. NASA's Innovative Advanced Concepts (NIAC) Program is seeking Phase II proposals for continuation of promising studies selected during the first phase of the visionary program.

23 May 2013

Bioresorbable Splint Made Using 3D Printing Process Saves Baby’s Life

Every day, their baby stopped breathing, his collapsed bronchus blocking the crucial flow of air to his lungs. April and Bryan Gionfriddo watched helplessly, just praying that somehow the dire predictions weren't true.

23 May 2013

KiwiNet Research Commercialisation Awards to Honor Aduro Biopolymers

The formation of spin-out company Aduro Biopolymers by WaikatoLink Limited, the technology transfer organisation of the University of Waikato, has resulted in a finals place in the Commercial Deal Award in the KiwiNet Research Commercialisation Awards. Winners will be announced at an awards function on 19th June in Auckland.

23 May 2013

Uniqsis Develops Mild Nitration Method Using FlowSyn Flow Chemistry System

Uniqsis has published details of a mild nitration method using its FlowSyn flow chemistry system that enables short reaction times and high conversion to be achieved whilst minimising the amount of corrosive (and potentially explosive) hot nitrating mixture present in the reactor at any one time.

23 May 2013