Materials Science News

RSS

Finest Thermoelectric Material Made of Less Toxic, Affordable Elements

At the Seoul National University, a research group under the guidance of Professor In Chung has reported the development of the latest record-breaking thermoelectric material made of affordable and less-toxic elements.

4 Aug 2021

SPECTRO Introduces SPECTROMAXx LMX09 ARC/SPARK OES Analyzer

SPECTRO Analytical Instruments has announced the newest version of its SPECTROMAXx ARC/SPARK OES analyzer with next-generation improvements for the ultra-reliable advanced analysis of incoming and outgoing materials at metal producing and fabricating plants.

From SPECTRO Analytical Instruments GmbH 4 Aug 2021

Master Bond's Highly Thermally Conductive, NASA Low Outgassing Silver Filled Epoxy

Master Bond EP3HTS-TC is a one part, NASA low outgassing rated epoxy, with an outstanding thermal conductivity of 16-17 W/(m·K).

From Master Bond Inc. 4 Aug 2021

TESCAN’s Large Volume Workflow Significantly Improves Sample Processing Time for Semiconductor Failure Analysis and Materials Research

TESCAN ORSAY HOLDING a.s. launches their Large Volume Workflow to support semiconductor, automotive, and aerospace industries and their related research fields that are now experiencing an increasing need for large volume material removal to reach regions of interest faster for failure and defect root-cause analyses.

From Tescan Group 4 Aug 2021

Using Conductive Nanomaterials to Combat Cardiovascular Disease

The use of a conductive nanomaterial-based cardiac tissue engineering system could help patients recover from heart attacks.

By Robert Lea 3 Aug 2021

New biocompatible UV adhesive for soft plastics

Tubes are bonded to connectors using Vitralit® UV 7030.

From Hoenle AG 3 Aug 2021

Record-High Power Conversion Efficiency Achieved for Thin Film Solar Cells

The Research Center for Thin Film Solar Cell of the Daegu Gyeongbuk Institute of Science and Technology (DGIST) successfully achieved the world’s highest PCE of 12.2% for flexible CZTS thin-film solar cells.

3 Aug 2021

Study Offers Insights into Mechanism of a Deadly Problem in Rocket Engine Combustors

Combustors are considered crucial pieces of gas engines and the chambers in which the combustion powering the engine takes place. But combustors tend to break down as a result of deadly high-frequency oscillations at the time of the combustion process.

3 Aug 2021

Researchers Use Microorganisms to Convert CO2 into Plastic and Polymers

Carbon dioxide is regarded as one of the primary contributors to climate change, which implies that CO2 emission needs to be controlled in the future. Scientists from Fraunhofer are projecting a potential method to reduce these emissions.

3 Aug 2021

Inspiring Industry Podcast Reaches 100K Downloads

Leading materials supplier, Goodfellow, has reached a new milestone with its Materials Inside Podcast, which has now reached 100,000 downloads in just 5 months, across 20 episodes.

From Goodfellow 3 Aug 2021

Functional Automotive Exteriors with Printed/Flexible Electronics

While vehicle interiors might be an obvious target for emerging technologies based on printed/flexible electronics, there are also plenty of opportunities for vehicle exteriors.

From IDTechEx 3 Aug 2021

Bostik Expands Born2Bond™ Engineering Adhesives with Anaerobic Range

Bostik, an Arkema Company, has launched a new range of high-performance anaerobic adhesives to provide engineers with more reliable, cost effective and convenient alternatives to commonly used mechanical fastening solutions such as washers, gaskets, pins, hemps and tapes.

From Bostik SA 3 Aug 2021

Hyperion Materials & Technologies to Acquire Sinter Sud

Hyperion Materials & Technologies, a leading global materials science company that specializes in developing advanced hard and super-hard materials for a wide range of industries and applications, announced today it has reached an agreement to acquire Sinter Sud S.p.A., an Italy-based manufacturer of cemented carbide products.

From Hyperion Materials & Technologies 3 Aug 2021

Researchers Develop Green Electrospinning Process for Biofabrication

Green manufacturing is currently transforming into a highly vital process among industries, fueled by increasing awareness of adverse health and environmental impacts linked with conventional practices.

2 Aug 2021

Researchers Synthesize 2D Porous Crystalline Materials in Simulated Microgravity

Crystallization studies carried out in space laboratories, which are unaffordable and expensive for the majority of research labs, demonstrated the beneficial effects of microgravity during the crystal growth process and the morphogenesis of materials.

30 Jul 2021