Corr-Paint™ CP2050-LF, a new high temperature corrosion protective coating developed by Aremco Products, Inc., is now used to insulate flare stacks and other high temperature industrial structures in applications to 400 ºF (204 ºC).
Corr-Paint™ CP2050-LF is a two part, 100% solids, epoxy-novolac, corrosion resistant coating used to protect steel components and structures used in aircraft, automotive, chemical processing, foundry, and power generation facilities for applications to 400 ºF (204 ºC).
Corr-Paint™ CP2050-LF provides excellent adhesion to marginally prepared metal surfaces and exceptional corrosion resistance. It is resistant to a wide range of chemicals including acetic acid, jet fuel, alcohols, diesel fuel, gasoline, hydrochloric acid, nitric acid, phosphoric acid, potassium chloride, sodium chloride, toluene and xylene. It also provides good thermal shock, salt spray, and UV resistance.
Corr-Paint™ CP2050-LF is a two-part system that is mixed in a 1-to-1 ratio by weight. It mixes to a thick paste and is applied using a trowel, spatula or plural component spray system. It sets and cures fully at room temperature in 24 hours or can be heat cured at 175 ºF for 4 hours to reduce set time. Typical film thickness is 50 mils for a single coat.
Corr-Paint™ CP2050-LF is part of a family of three coatings including CP2050-FF and CP2050-NF. CP2050-LF is filled with long, coarse glass fibers, FF with fine glass fibers and NF is unfilled. Glass fibers are used to absorb thermal stresses and increase strength when coating large areas. All products are available from stock in pint, quart, gallon and five-gallon kits.