Latest Articles

RSS

AMECare Performance Services™ for Peak Performance and Maximum Return on Investment

AMECare Performance Services™ from Precitech is a program intended to achieve peak performance and maximum return on investment.

From AMETEK Precitech 23 Apr 2015

Off-Axis Conic Surfaces for Non-Axisymmetric Surface Generation

A traditional single point diamond turning (SPDT) lathe describes a curve in space using two axes of motion. The formation of the curve is between the centerline of the work piece to be machined and the cutting edge of a diamond tool.

From AMETEK Precitech 22 Apr 2015

Free-Fall Heating of Particle to High Temperatures

As temperature increases, CAPEX becomes more significant. As a result it is necessary to use a modeling tool to correctly size the equipment for the desired production rate.

From Harper International 22 Apr 2015

An Introduction to Machining Non-Axisymmetric Optics

Existing single point diamond turning machines are capable of fabricating complex aspheric optical surfaces; however, the machine tool limits these surfaces to ones of revolution.

From AMETEK Precitech 22 Apr 2015

Testing the OneLeg Stool and How it Opened Up New Markets

OneLeg's ergonomic gardening stool excels in strength tests, supporting 270kg and withstanding 1,000kg force, expanding its market reach.

From Lloyd Instruments Ltd. 22 Apr 2015

The Medical Applications of Particle Accelerators

The development of medicine has been always been dependent on the evolution of our knowledge of physics. Imaging cells in our bodies using microscopy and broken bones using X-ray radiation are two well known examples but particle accelerators also have many important medical applications.

By Abdelkrim Alileche 21 Apr 2015

Configuring Dielectric and Conductivity Sensors

This article discusses configuring dielectric and conductivity sensors.

From Lambient Technologies 21 Apr 2015

Using Diamonds (PCD and Synthetic Grains) in Abrasive Tools for the Aerospace Industry

This article discusses the diamonds (PCD and synthetic grains) used in abrasive tools for the aerospace industry.

By Alessio Spampinato 21 Apr 2015

$Using Laser Diffraction Particle Size Analysis to Detect the Presence of Anomolous Large Particles within Powders$

Using Laser Diffraction Particle Size Analysis to Detect the Presence of Anomolous Large Particles within Powders

The following are concerns when measuring a small sample of dry powders: It is not representative of the bulk, and small quantities of oversized particles may be left undetected.

From Malvern Panalytical 20 Apr 2015

Polishing of Focused Ion Beam Specimens with the PIPS II System

Optimized low-energy ion beam polishing in PIPS II enhances TEM specimen quality, reducing FIB-induced damage for high-resolution imaging.

From Gatan, Inc. 20 Apr 2015

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Latest Articles

AMECare Performance Services™ for Peak Performance and Maximum Return on Investment

Off-Axis Conic Surfaces for Non-Axisymmetric Surface Generation

Free-Fall Heating of Particle to High Temperatures

An Introduction to Machining Non-Axisymmetric Optics

Testing the OneLeg Stool and How it Opened Up New Markets

The Medical Applications of Particle Accelerators

Configuring Dielectric and Conductivity Sensors

Using Diamonds (PCD and Synthetic Grains) in Abrasive Tools for the Aerospace Industry

Using Laser Diffraction Particle Size Analysis to Detect the Presence of Anomolous Large Particles within Powders

Polishing of Focused Ion Beam Specimens with the PIPS II System

Innovations in Battery Technology: From Failure Analysis to Vibrational Spectroscopy

Expert Insights into Thin Film Metrology: Techniques & Best Practices

Archaeometry: Unveiling the Past with Future-Ready Tools

KLA-7 low-temperature flow tester for petroleum products

In-situ Nanomechanical Testing with Hysitron PI Envision

Verification for Measurement Devices with the ABB Ability™

Sponsored Content

Understanding Fugitive Emissions and Why They Matter

Replacing a Chart Recorder With Digital Data Logging Solutions

Selecting Analytical Technologies for Polymer Testing and Recycling

Why Nondestructive Fruit Quality Testing Matters for Growers

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Latest Articles

Innovations in Battery Technology: From Failure Analysis to Vibrational Spectroscopy

Expert Insights into Thin Film Metrology: Techniques & Best Practices

Archaeometry: Unveiling the Past with Future-Ready Tools

1New Smart Plastic to Revolutionize Aerospace and Automotive Industries

2EV NMC Battery Market to Reach USD 70.8 Billion by 2030, Driven by Rapid Electrification and High-Energy Density Demand | Valuates Reports

3Chill Without the Spill: UC Davis' Reusable 'Jelly Ice'

4New “Breathing” Crystal Could Advance Clean Energy and Smart Tech

5Scientists Turn CO₂ Into High-Performance Fuels Using Nickel Catalyst

6Novel Li-ion Additives Paving the Way for PFAS-Free Batteries

Sponsored Content

Editorial Highlights