Latest Articles

RSS

Using Evident OLS4000 Laser Confocal System to Create Robotic Insect Wings

The School of Engineering and Applied Sciences (SEAS) at Harvard University needed a metrology instrument to quantify the relationship between a natural insect wing.

From Evident Corporation - Industrial Microscopy 31 Jul 2014

Manufacturing Excellence of Uranium Fuel Bundles

Harper has a client which supplies uranium and produces uranium fuel bundles. This client provides its uranium products to CANDU nuclear energy plants for production of clean energy safely and reliably. It is licensed to produce 1,200 tons of uranium as finished fuel every year.

From Harper International 31 Jul 2014

Using UBE NYLON in the Manufacturing of Composite Parts

UBE NYLON CoPA 6/6.6 and TerPA 6/6.6/12 have been used for quite a while in the extrusion of vacuum bagging films and in the fabrication of composite components. Industrial end products are produced using these composite components in industries, including automotive, construction, energy, nautical and aerospace.

From UBE Group 30 Jul 2014

The Properties and Applications UPILEX-S Polyimide Films

UBE offers UPILEX-S polyimide films with superior resistance to heat and chemicals over a broad temperature range. They have a UL94 flammability rating of VTM-0, and have no melting point. Their mechanical properties are much superior to currently available products.

From UBE Group 30 Jul 2014

The Properties and Applications of UPILEX-RN Polyimide Films

UBE’s UPILEX polyimide films exhibit superior chemical resistance when compared to other polyimide materials. They have a UL-94 flammability rating of VTM-0, and have no melting point.

From UBE Group 30 Jul 2014

Powder Testing to Improve Product Quality and Manufacturing Efficiency

Jamie Clayton, Operations Director at Freeman Technology, talks to AZoM about using powder testing to improve product quality and manufacturing efficiency.

From Freeman Technology 25 Jul 2014

The Development of MaxSi™ Graft Technology

In this interview, Professor Iain Gibson, Chief Scientific Officer (CSO) at SIRAKOSS, talks to AZoM about the development of their MaxSi™ Graft technology.

From OSSDSIGN AB 23 Jul 2014

Industrial Flare Gas Monitoring

Dr. Frank DeThomas, Vice President of Sales and Technical Support at Extrel CMS, talks to AZoM about the benefits their MAX300-IG Industrial Gas Analyzer can bring to flare-gas monitoring.

From Process Insights - Mass Spectrometry 23 Jul 2014

New Phase-Changing Material Developed for the Robotics Industry

A new, 3D printed, phase-changing material has been developed by reaserchers from Massachusetts Institute of Technology (MIT) which could have a major impact on the robotics industry.

By Alessandro Pirolini 18 Jul 2014

Detecting and Quantifying the Formation of Protein Sub-Visible Particles

This article discusses the application of the Archimedes system to determine and measure the introduction of silicone oil droplets and formation of protein sub-visible particles in response to shear stress.

From Malvern Panalytical 17 Jul 2014