Latest Articles

RSS

Thermosetting Polymers – Rheological Testing

Fiber-reinforced composites and filled plastics used in a wide range of products use thermoset polymers as the key matrix.

From TA Instruments 21 Jul 2015

A Web Application for Custom Spectrometer Design

In this interview, Nicholas Goiertz from Photon Control talks about their recently-launched interactive web application, the Custom Spectrometer Builder.

By Will Soutter 20 Jul 2015

i-Raman® Series for Process Analytical Technology

Raman spectroscopy excels in real-time PAT applications, offering rapid, high-accuracy analysis for various industrial processes.

From Metrohm AG 16 Jul 2015

Comparing the Performance of Various Activated Carbon (AC) Based Catalysts

The performance of different activated carbon (AC) based catalysts in reforming of CH4 with CO2 was compared in this study. The AC-based catalysts studied were raw AC, AC modified NaNO3 (designated as AC-NaNO3), and AC modified with HNO3 (designated as AC-HNO3).

From Hiden Analytical 16 Jul 2015

Producing Glucose from Cellulose Hydrolysis

There are a number of efficient methods available for biomass conversion into chemicals and fuels. One such method is catalytic hydrolysis of cellulose using solid acid catalysts.

From Hiden Analytical 16 Jul 2015

Regeneration Mechanism of Lean NOx Trap (LNT) Catalysts

When it comes to removing NOx from lean burn engine exhausts, lean NOx trap (LNT) or NOx storage and reduction (NSR) catalysts are considered as one of the most potential technologies.

From Hiden Analytical 16 Jul 2015

Low Frequency Raman Spectroscopy and Instrumentation

B&W Tek's i-Raman Plus and E-grade probe offer precise Low Frequency Raman Spectroscopy down to 65cm-1 for advanced material analysis.

From B&W Tek 15 Jul 2015

Characterizing a Membrane Electrode Assembly from a Proton Exchange Fuel Cell Using XPS

This article enumerates how XPS is used for MEA analysis and to determine if platinum migration has taken place from the catalytically active layers into the adjacent Nafion electrolyte.

From Thermo Fisher Scientific – X-Ray Photoelectron Spectroscopy (XPS) 15 Jul 2015

Using XPS for the Characterization of ‘Click’ Surface Chemistry

The characterization of a conductive polymer device is performed using the Thermo Scientific K-Alpha XPS. The conductive polymer surface acts as a precursor in the ‘click’ chemistry process.

From Thermo Fisher Scientific – X-Ray Photoelectron Spectroscopy (XPS) 15 Jul 2015

Equipping Remotely Operated Vehicles with Subsea Polyurethane to Increase Dive Depth

This article shows how the subsea polyurethane foam supplied by General Plastics was integrated in remotely operated vehicles (ROV) to withstand underwater buoyancy.

From General Plastics Manufacturing 15 Jul 2015

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Latest Articles

Thermosetting Polymers – Rheological Testing

A Web Application for Custom Spectrometer Design

i-Raman® Series for Process Analytical Technology

Comparing the Performance of Various Activated Carbon (AC) Based Catalysts

Producing Glucose from Cellulose Hydrolysis

Regeneration Mechanism of Lean NOx Trap (LNT) Catalysts

Low Frequency Raman Spectroscopy and Instrumentation

Characterizing a Membrane Electrode Assembly from a Proton Exchange Fuel Cell Using XPS

Using XPS for the Characterization of ‘Click’ Surface Chemistry

Equipping Remotely Operated Vehicles with Subsea Polyurethane to Increase Dive Depth

Innovations in Battery Technology: From Failure Analysis to Vibrational Spectroscopy

Expert Insights into Thin Film Metrology: Techniques & Best Practices

Archaeometry: Unveiling the Past with Future-Ready Tools

KLA-7 low-temperature flow tester for petroleum products

In-situ Nanomechanical Testing with Hysitron PI Envision

Verification for Measurement Devices with the ABB Ability™

Sponsored Content

Understanding Fugitive Emissions and Why They Matter

Replacing a Chart Recorder With Digital Data Logging Solutions

Selecting Analytical Technologies for Polymer Testing and Recycling

Why Nondestructive Fruit Quality Testing Matters for Growers

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Latest Articles

Innovations in Battery Technology: From Failure Analysis to Vibrational Spectroscopy

Expert Insights into Thin Film Metrology: Techniques & Best Practices

Archaeometry: Unveiling the Past with Future-Ready Tools

1New Smart Plastic to Revolutionize Aerospace and Automotive Industries

2EV NMC Battery Market to Reach USD 70.8 Billion by 2030, Driven by Rapid Electrification and High-Energy Density Demand | Valuates Reports

3Chill Without the Spill: UC Davis' Reusable 'Jelly Ice'

4New “Breathing” Crystal Could Advance Clean Energy and Smart Tech

5Scientists Turn CO₂ Into High-Performance Fuels Using Nickel Catalyst

6Novel Li-ion Additives Paving the Way for PFAS-Free Batteries

Sponsored Content

Editorial Highlights