Tensile Testing Using Mecmesin MultiTest 25-xt Test System

This video shows the testing of samples using Mecmesin MultiTest 25-xt force testing stand to establish elongation under load and breaking strain. The samples are clamped using plane grips which are then stretched to 100mm per minute. The elongation and the force applied can be recorded at up to 1000 times per second.

After the test the calculated can be made on the collected data and the results are displayed on the touch-screen or saved and exported for statistical purposes. The built-in detector in MultiTest 25-xt senses when the sample has broken and the traveling crosshead is sent back to the 'home' position ready for the next sample.

The MultiTest 25-xt and Emperor software has been superseded by the OmniTest Touch universal testing machine and VectorPro software.

Run Time – 2:02 minutes.

Tensile Test on a MultiTest 25-xt Touch-screen Force Tester - Mecmesin Force Measurement

Other Videos by this Supplier

Tell Us What You Think

Do you have a review, update or anything you would like to add to this video content?

Leave your feedback
Your comment type

Materials Videos by Subject Matter

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.