Articles | Latest Articles

Latest Articles

RSS

ROI for 3D Scanning Technology

ROI for 3D Scanning Technology

Martin Schuster talks about how replacing traditional QA systems with 3D scanning can streamline processes.

From CyberOptics Corporation 22 Jun 2016

Detection, Removal, and Prevention of Water in Thermal Oil Systems

Detection, Removal, and Prevention of Water in Thermal Oil Systems

Ensure thermal oil systems are water-free by checking for murky samples, observing pump pressure, and performing a thorough boilout.

From Paratherm 22 Jun 2016

What Will Advanced Alloys Be Like In 100 Years?

What Will Advanced Alloys Be Like In 100 Years?

For thousands of years, the development of new metal alloys has mostly been trial-and-error. Typically, one metal component has been dominant; with other metals comprising a small percentage of the recipe.

By Brett Smith 20 Jun 2016

Improving LC-MS Separations with On-Site Nitrogen Generation

Improving LC-MS Separations with On-Site Nitrogen Generation

AZoM spoke to Greg Stringfellow, of Peak Scientific, about how their on-site nitrogen generators can be used to improve the quality and efficiency of LC-MS separations whilst also saving laboratories money in the long term.

From Peak Scientific 20 Jun 2016

Precision Force-Displacement Measurements for Evaluating Design and Fitness for Use of MEMS and Computing Input Devices

Precision Force-Displacement Measurements for Evaluating Design and Fitness for Use of MEMS and Computing Input Devices

The overall design and fitness of structures on micromeasuring devices or microelectromechanical systems (MEMS) need to be validated by their force-displacement characteristics.

From Bruker Nano Surfaces and Metrology 17 Jun 2016

ISO-Standardized Filtering for DektakXT Stylus Profilers

ISO-Standardized Filtering for DektakXT Stylus Profilers

When various parameters of a surface - such as roughness, step heights, or depths - are measured by any metrology method, only a representation of the surface characteristics is obtained. Nevertheless, the potential of proper filtering for data analysis carried out in accordance with established ISO standardized techniques can never be underestimated while aspiring to provide the most reproducible and highly accurate results for a measuring system.

From Bruker Nano Surfaces and Metrology 17 Jun 2016

Generating a Stribeck Curve in a Reciprocating Test

Generating a Stribeck Curve in a Reciprocating Test

A plot illustrating the frictional characteristics of a liquid lubricant, under conditions such as mixed and hydrodynamic regimes and boundary, is known as the Stribeck curve.

From Bruker Nano Surfaces and Metrology 17 Jun 2016

Fast and Accurate Corrosion Monitoring with Bruker 3D Optical Microscopes for Cost Saving in the Refining Industry

Fast and Accurate Corrosion Monitoring with Bruker 3D Optical Microscopes for Cost Saving in the Refining Industry

The annual cost of degradation of materials and infrastructure in the oil transport and refining industry caused by corrosion is roughly $8 billion.

From Bruker Nano Surfaces and Metrology 17 Jun 2016

Characterizing Lubricants for Research and Development, Quality Control and Application Engineering

Characterizing Lubricants for Research and Development, Quality Control and Application Engineering

The role of lubricants is critical in virtually every type of machinery by influencing the reliability, speed, and service life of the machinery.

From Bruker Nano Surfaces and Metrology 17 Jun 2016

3D Optical Microscopy for Orthopedic Implants

3D Optical Microscopy for Orthopedic Implants

This article discusses how Bruker’s 3D optical microscopy method can be effectively used in the R&D and quality control phases of orthopedic implants manufacturing.

From Bruker Nano Surfaces and Metrology 17 Jun 2016

KLA-7 low-temperature flow tester for petroleum products

KLA-7 low-temperature flow tester for petroleum products

The Koehler KLA7 low-temperature flow tester enables precise low temperature flow testing of lubricants and fuels.

From LABEQUIP LTD

The AriesPlus Temperature Controller

The AriesPlus Temperature Controller

Experience programmable control with the simplicity of a touchscreen using the AriesPlus temperature controller.

From CARBOLITE

In-situ Nanomechanical Testing with Hysitron PI Envision

In-situ Nanomechanical Testing with Hysitron PI Envision

Discover Brukers's Hysitron PI Envision for all your nanomechanical testing needs.

From Bruker Nano Surfaces and Metrology

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Hi, I'm Azthena, you can trust me to find commercial scientific answers from AZoNetwork.com.

To start a conversation, please log into your AZoProfile account first, or create a new account.

Registered members can chat with Azthena, request quotations, download pdf's, brochures and subscribe to our related newsletter content.

A few things you need to know before we start. Please read and accept to continue.

Use of “Azthena” is subject to the terms and conditions of use as set out by OpenAI.
Content provided on any AZoNetwork sites are subject to the site Terms & Conditions and Privacy Policy.
Large Language Models can make mistakes. Consider checking important information.

I understand, and agree to receive occasional emails about Azthena such as usage tips and new feature announcements.

Please check the box above to proceed.

Great. Ask your question.

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.