Articles | Latest Articles

Latest Articles

RSS

A Basic Guide to Particle Characterization

A Basic Guide to Particle Characterization

This article provides a fundamental understanding of the key particle characterization methods that are being used in academia and industry alike.

From Malvern Panalytical 17 Jun 2016

Measuring Oil Chemistry: Nitration, Oxidation and Sulfation

Measuring Oil Chemistry: Nitration, Oxidation and Sulfation

Air, pressure, heat, corrosive agents, and other factors encountered by a lubricant during use can cause chemical changes in the oil. Changes in the oil chemistry can have a negative impact on the working ability of the oil - e.g. when crucial additives are depleted.

From AMETEK Spectro Scientific 17 Jun 2016

Increased Up-time, Fast Response and Preventive Maintenance with ServiceGuard from Struers

Increased Up-time, Fast Response and Preventive Maintenance with ServiceGuard from Struers

Lars Kalnæs, Global Service Manager at Struers, talks to AZoM about ServiceGuard, a new comprehensive service offering for the Materialographic industry.

From Struers Ltd. 16 Jun 2016

Measuring Fuel Dilution in Lubricating Oil

Measuring Fuel Dilution in Lubricating Oil

Severe engine damage can occur due to fuel dilution in lubricating oil, as high fuel levels (>2%) in a lubricant can lead to decreased viscosity, loss of dispersancy, oil degradation, and loss of oxidation stability.

From AMETEK Spectro Scientific 15 Jun 2016

Measuring Soot In Lubrication Oil

Measuring Soot In Lubrication Oil

Due to the fact that 100% efficiency cannot be achieved by any engine, products other than water and carbon dioxide will be formed during combustion, such as soot, which is formed as a result of incomplete combustion.

From AMETEK Spectro Scientific 15 Jun 2016

Measuring Water in Oil

Measuring Water in Oil

It is a common saying that ‘oil and water don’t mix’, but this does not essentially apply in the case of lubrication oils. In lubrication oils, water can exist in a number of states, and if left unchecked, can cause considerable damage to valuable assets.

From AMETEK Spectro Scientific 15 Jun 2016

A Guide to Spectroscopy for Used Oil Analysis

A Guide to Spectroscopy for Used Oil Analysis

Condition monitoring programs mainly focus on assessing the wear condition of equipment. Wear particles will be generated by oil wetted equipment throughout its service life. The rate and nature of the wear differ from initial break in through to the end of life seizure.

From AMETEK Spectro Scientific 15 Jun 2016

A Guide to Measuring Oil Viscosity

A Guide to Measuring Oil Viscosity

Viscosity the most important physical property of a lubricating oil, as determines how easily the oil circulates and its load carrying capability.

From AMETEK Spectro Scientific 15 Jun 2016

Maintaining Your Thermal Oil Systems

Maintaining Your Thermal Oil Systems

Optimizing thermal oil system maintenance requires considering fluid compatibility, cleaning methods, and proper fluid removal and charging techniques.

From Paratherm 15 Jun 2016

What Elements are Used in Electric Car Batteries?

What Elements are Used in Electric Car Batteries?

There is a range of materials being used in batteries for electric vehicles. Lithium-ion batteries are utilized in the majority of all-electric and plug-in hybrid electric vehicles, nickel-metal-hydride batteries are common in hybrid cars, and newer materials are being introduced, such as lithium polymer and lithium iron phosphate, with more on the horizon.

By Kimberly Lawson 15 Jun 2016

KLA-7 low-temperature flow tester for petroleum products

KLA-7 low-temperature flow tester for petroleum products

The Koehler KLA7 low-temperature flow tester enables precise low temperature flow testing of lubricants and fuels.

From LABEQUIP LTD

The AriesPlus Temperature Controller

The AriesPlus Temperature Controller

Experience programmable control with the simplicity of a touchscreen using the AriesPlus temperature controller.

From CARBOLITE

In-situ Nanomechanical Testing with Hysitron PI Envision

In-situ Nanomechanical Testing with Hysitron PI Envision

Discover Brukers's Hysitron PI Envision for all your nanomechanical testing needs.

From Bruker Nano Surfaces and Metrology

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Hi, I'm Azthena, you can trust me to find commercial scientific answers from AZoNetwork.com.

To start a conversation, please log into your AZoProfile account first, or create a new account.

Registered members can chat with Azthena, request quotations, download pdf's, brochures and subscribe to our related newsletter content.

A few things you need to know before we start. Please read and accept to continue.

Use of “Azthena” is subject to the terms and conditions of use as set out by OpenAI.
Content provided on any AZoNetwork sites are subject to the site Terms & Conditions and Privacy Policy.
Large Language Models can make mistakes. Consider checking important information.

I understand, and agree to receive occasional emails about Azthena such as usage tips and new feature announcements.

Please check the box above to proceed.

Great. Ask your question.

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.