Materials Science News

RSS

One Component Elastomeric Primer/Adhesive System Meets ISO 10993-5 Specifications

Developed for priming and bonding polyolefinic substrates, Master Bond X21Med is a single component elastomeric compound that passes ISO 10993-5 tests for cytotoxicity.

From Master Bond Inc. 8 Aug 2017

Alicat Expands Industrial Automation Protocol Options with Addition of Modbus TCP/IP

Alicat Scientific has added Modbus TCP/IP compatibility to its line of mass flow, pressure, and liquid instrumentation. The new option allows PLCs running the Modbus industrial automation protocol to connect to Alicat instruments over Ethernet cable.

From Alicat Scientific, Inc. 8 Aug 2017

Researchers Obtain Hybrid Photoactive Materials Using More Stable and Rigid Dyes

Researcher Rebeca Sola from the Department of Physical Chemistry in the UPV/EHU's Faculty of Science and Technology has created and characterized hybrid materials that react differently to light, and hold promise for potential use in extremely different areas ranging from optics to biomedicine.

7 Aug 2017

Thermo Fisher Scientific’s New Talos F200i S/TEM Delivers Flexible, High-Performance Imaging

New compact S/TEM can be configured to meet specific imaging and analytical requirements for materials characterization in research laboratories. Research laboratories can now address a wide range of high-end mate...

From Thermo Fisher Scientific 7 Aug 2017

New Quattro Field Emission ESEM Emphasizes Versatility and Ease of Use

Thermo Scientific Quattro ESEM allows materials science researchers to study nanoscale structure in almost any material under a range of environmental conditions. The ability of scientists to study samples at the ...

From Thermo Fisher Scientific 7 Aug 2017

ORNL Researchers Develop Gas Flow Cell for Studying the Atomic Structure of Catalysts

Access to a cutting-edge capability for studying catalysts has now been obtained by researchers at the US Department of Energy’s Oak Ridge National Laboratory (ORNL).

7 Aug 2017

Bruker Introduces Software Package for Layer Analysis with XTrace Micro-XRF on Electron Microscopes

At the Microscopy & Microanalysis 2017 Meeting Bruker today presents XMethod, the world’s first software package for the analysis of composition and thickness of single or multiple layers, based on data obtained by sample excitation with the XTrace micro-focus X-ray source for scanning electron microscopes (SEM). The software enables the characterization of thin films and multi-layer structures of thickness ranging from a few nanometers up to 40 microns without the need for cross sectioning the sample.

From Bruker 7 Aug 2017

Researchers Use New Technology to 3D Print Flexible Sensors onto Curved and Organic Surfaces

University of Minnesota Associate Professor Michael McAlpine and his team of researchers developed a technology enabling them to 3D-print flexible sensors onto curved and organic surfaces.

7 Aug 2017

Simusolar, Sculpteo Join Forces to Develop 3D-Printed Solar-Charged Solutions

As the race for sustainable energy charges on, developing nations often get lost in the shuffle. In Tanzania, over 30 million people lack energy, making up a whopping 75% of the country’s population.

7 Aug 2017

Researchers Use 3D Data to Understand Cardiac Conduction System

A pioneering new study is set to help surgeons repair hearts without damaging precious tissue.

7 Aug 2017

WITec’s RISE Microscopy Now Available with ZEISS Sigma 300 SEM

Image Credis: WITec WITec’s solution for correlative Raman-SEM imaging is now available for ZEISS Sigma 300, a field emission scanning electron microscope (FE-SEM). With this jointly-developed system, WITec ...

From WITec GmbH 7 Aug 2017

Lucideon to Host Webinar on the Effects of Powder Milling on Performance

Lucideon, the materials development and commercialization organisation, is hosting a webinar titled ‘The Effect of Powder Milling on Performance’ on Thursday 7 September at 15:00 UK time, 10:00 EDT. The we...

7 Aug 2017

Custom Replacement for Ageing Water Ring Main Filter

Amazon Filters Ltd., a F4N (Fit for Nuclear) approved manufacturer of Nuclear filtration products, has designed and supplied a custom filter housing to a world renowned advanced research laboratory, to replace an ageing cooling water ring main filter.

7 Aug 2017

High-energy UV lamp

McPherson is pleased to announce new and improved stability with flow controlled McPherson windowless, hollow cathode UV lamp Model 629. This broad-spectrum source emits ionized gas emission lines with little or no absorption by neutral gas. Computer controlled gas flow and constant current power supply improve stability for better spectroscopy.

From McPherson Inc 4 Aug 2017

New Insulator Seal (ISI™) Catalog from MDC

Insulator Seal Inc. (ISI™), a division of MDC Vacuum Products, LLC has just published a brand new catalog featuring the division’s complete line of electrical and optical ceramic-to-metal sealed components.

From MDC Vacuum Products, LLC 4 Aug 2017