Scientists from the Czech Technical University in Prague’s faculty of civil engineering have investigated the biodegradability and ecotoxicity of ‘bone glue,’ a protein-based adhesive. The results of this investigation have been published online in a study in Polymers.
By Reginald Davey
31 May 2022
Writing in Polymers, a team of researchers from the United Arab Emirates University have reported the development of a recycled carbon fiber/PLA composite to valorize waste streams and meet growing commercial demands for both materials.
By Reginald Davey
31 May 2022
A new paper published in Bioprinting has reviewed the field of 3D plant cell bioprinting. Current and future perspectives have been thoroughly investigated in the review study, as well as limitations with current technologies and potential future applications.
By Reginald Davey
31 May 2022
A paper recently published a paper in the MDPI journal Energies demonstrated a novel method to accurately evaluate photovoltaic (PV) module degradation rates for aging diagnosis through the on-site measurement of PV power output.
By Samudrapom Dam
31 May 2022
In an article recently published in the journal Additive Manufacturing, researchers discussed the utility of greyscale printing and characterization of the binder migration pattern during 3D sand mold printing.
By Surbhi Jain
31 May 2022
In an article recently published in the journal Additive Manufacturing, researchers presented a simulation of shrinkage during the sintering of additively manufactured silica green bodies.
By Surbhi Jain
31 May 2022
Chula's researchers have garnered themselves a world-class reward for their latest solar cell project which increases the capacity of electricity production and can be applied to numerous types of merchandise. These new solar cells are guaranteed to meet international standards and develop clean energy for society.
With the rapid reduction in the costs of renewable energy generation, such as wind and solar power, there is a growing need for energy storage technologies to make sure that electricity supply and demand are balanced properly.
RPI, leading provider in rotary measurement and angular positioning devices, have expanded their metrology product range with the launch of OctoScan, improving productivity by up to 40%.
Join Micromeritics in Portland, Oregan, USA between June 12 – 15 2022 at AMPM on booth #221.
The exhibition and conference focus on metal additive manufact...
Join Micromeritics in Portland, Oregan, USA between June 12 – 15 2022 at AMPM on booth #221.
The exhibition and conference focus on metal additive manufacturing, and wil...
As a result of several chemical and physical changes, metals that are subjected to direct exposure to water, air, or other corrosive media are inclined to damage. This results in environmental issues and huge resource waste.
At the Delft University of Technology (TU Delft), researcher Laura Rossi and her team have come up with a new approach to designing synthetic materials out of tiny glass particles—alleged colloids.
To make artificial intelligence and autonomous driving systems, which are frequently shown in movies, a reality in everyday life, computer processors that serve as the brain must be able to analyze more data.
The energy- and waste-intensive anthraquinone oxidation (AO) process is used to manufacture hydrogen peroxide (H2O2), which is one of the world’s 100 most important chemicals.