In an article recently published in the open-access journal Materials, researchers discussed the development of 3D printed foot orthosis having sensorized house slipper.
By Surbhi Jain
10 Jun 2022
A team of researchers demonstrated the feasibility of using thermally reduced large-sheet graphene oxide (LGO) for high-efficiency microwave absorption (MA).
By Samudrapom Dam
10 Jun 2022
Researchers discussed the utility of de-alloyed water- and air-sensitive nanoporous metals and metalloids for emerging energy applications in a new study.
By Surbhi Jain
10 Jun 2022
Master Bond UV17Med is a one part, no mix, UV curable system. It was specially formulated to provide excellent adhesion to many TPUs (thermoplastic polyurethanes), which are widely recognized as challenging substrates for bonding.
An article published in ACS Energy Letters provides an overview of the first-ever 2T perovskite/CIS TSC with a power conversion efficiency (PCE) approaching 25%.
By Ibtisam Abbasi
10 Jun 2022
Novel research published in Polymers looks at its applications in dentistry and methods such as laser treatment for increasing the adhesive characteristics of polyetheretherketone (PEEK).
By Ibtisam Abbasi
10 Jun 2022
GSSI recently held a three-month online intensive workshop on Ground Penetrating Radar (GPR) for archeology customers, led by expert Dr. Lawrence Conyers, Graduate Studies Director and Professor of Archaeology at the University of Denver.
In an article recently published in the journal Additive Manufacturing, researchers discussed the parametric optimization of the two-photon direct laser writing technique for the production of polymeric microneedles.
...
By Surbhi Jain
9 Jun 2022
Engineers have encountered difficulty in studying the basic properties of the materials involved as thermoelectric electronic, and computer technologies have been miniaturized to nanometer scale. And in many cases, targets are too small to be seen with optical instruments.
Professor Zhong Lin Wang of the Georgia Institute of Technology demonstrated in 2010 that the use of piezoelectric materials (materials that generate electrical energy when mechanical strain is applied) could improve the performance of optoelectronic devices (devices that convert light into electricity like solar cells) or electricity into light as in light-emitting diodes or LEDs.
In an article recently published in the journal Additive Manufacturing Letters, researchers discussed the utility of a flat-top laser beam in selective laser melting for the development of single crystals of pure nickel (Ni).
By Surbhi Jain
9 Jun 2022
A paper recently published in the journal ACS Applied Energy Materials demonstrated the use of MXenes in transparent photoelectric applications, specifically in transparent photovoltaic devices (TPVDs).
By Samudrapom Dam
9 Jun 2022
Fuel cells employ platinum as a catalyst. However, platinum degrades unevenly in fuel cells, resulting in still-usable platinum being discarded. To improve fuel cell durability and reduce waste, this research studied the causes of uneven platinum degradation, producing simple, effective strategies to reduce the waste of precious catalyst material and thereby encouraging the use of fuel cells in vehicles.
When temperatures fall below freezing, cellphones need to be recharged frequently, and electric cars have shorter driving ranges. This is because their lithium-ion batteries' anodes get sluggish, holding less charge and draining energy quickly.
With the new MAGIO series, JULABO is presenting its circulator portfolio as a complete series for the first time at a trade fair. MAGIO is expanding its CORIO and DYNEO brand portfolio with a high-end circulator for the most demanding temperature control applications in research and science.