Physical Properties Testing

Featured Equipment
Spectro’s Q5800 expeditionary fluid analysis system is a rugged, portable device that enables field operators to carry out detailed, mobile lubricant sampling.
The VTI-SA+ Vapor Sorption Analyzer is a continuous vapor flow sorption instrument for obtaining precision water and organic vapor isotherms at temperatures ranging from 5°C to 150°C at ambient pressure.
The new DV2T Viscometer available from Brookfield Engineering provides quick and easy viscosity measurements and includes a 5” color display to guide users through test creation and data gathering operations.
The Zetasizer μV adds the power of advanced light scattering techniques to your laboratory to improve accuracy, reliability and ease of use for the characterization of protein solutions.
The Discovery Hybrid Rheometer (DHR) from TA Instruments is an advanced system that has excellent performance specification and provides unparalleled direct stress control, direct strain control, and normal force measurement precision.
SBS-2002 Digital Hydrometer/Density Meter is used for reading specific gravity and temperature. Batteries can be easily tested using this meter.
The new Mastersizer 3000 particle size analyser delivers rapid, precise particle size distributions for both wet and dry dispersions. Working over the millimetre, micrometre and nanometre particle size ranges, it packs exceptional performance into the smallest of footprints, bringing operator-independent measurements that every user can rely on.
The UMT Tribolab has a versatile modular design which allows it to be transformed from rotary to reciprocating motion, from sub-newton to kilo-newton force measurement, or from room temperature up to 1000°C for environmental testing, all within minutes.
The Fungilab Evo Series is ideal for advance performance and multifuctional viscosity measurements. The data displayed include selected speed, selected spindle, viscosity reading, percentage of full scale, sample rate, shear stress and density.
Semilab has developed research and development tools for a wide range of applications in semiconductor, material sciences, and photovoltaic research.
The novel 6850 is a double beam spectrophotometer with a variable spectral bandwidth into the Jenway range. The two detectors and highly stable optics measure the sample and simultaneously optimize measurement accuracy.
SBS-3500 Digital Hydrometer/Density Meter is a portable specific gravity meter which helps in measuring sample’s density by using oscillating U-tube technology.
Malvern offers a fully automated dynamic flow particle imaging instrument called Sysmex FPIA 3000. The instrument allows fast and reliable measurement of the size and shape of particles in suspension.
HORIBA offers a flexible surface plasmon resonance imaging system called OpenPlex. The system is specifically designed to meet the needs of biophysicists, biologists and biochemists.
Other Equipment
The Zetasizer Nano ZS is a high performance, two angle particle and molecular size analyzer for the improves detection of aggregates and measurement of small or dilute samples, and samples at very low or high concentration using dynamic light scattering with ‘NIBS’ optics.
The ultrasonic test equipment Pundit Lab features online data acquisition, waveform analysis and full remote control of all transmission parameters. Along with the traditional transit time and pulse velocity measurement, the ultrasonic test equipment Pundit Lab offers path length measurement, perpendicular crack depth measurement and surface velocity measurement. Optimized pulse shaping gives greater transmission range at lower voltage levels. This, coupled with automated combination of the transmitter voltage and the receiver gain, ensures an optimum received signal level, guaranteeing accurate and stable measurements of the ultrasonic test equipment.
Epsilon Model 3580 high temperature diametral extensometers can perform diametral or transverse strain measurements at elevated temperatures of up to 1000°C.
The FT4 Powder Rheometer is a universal powder tester - three instruments in one, combining the Freeman Technology patented blade methodology for measuring flow energy with a range of shear cells, wall friction modules and other accessories for measuring bulk properties.
The 3542RA averaging axial extensometers from Epsilon are manufactured for conducting compressive strength tests on concrete, rock, and other large compression samples. These extensometers are capable of measuring axial strain on opposite sides of the test specimen, and the result is an average of the two readings.
Mahr has launched MarConnect, a new integrated wireless data transmission system under its Integrated Wireless range. It is now much simpler to acquire data with digital indicators.
Material: V2A Square sieve apertures with sieve gauze support; sieve mesh and sieve frame of stainless steel. The sieve apertures are produced electrochemically in accordance with DIN ISO 3310/3/1190E.
DVS Advantage from Surface Measurement Systems combines the vapor measurement, gas flow and microbalance technologies, providing exceptional performance with improved repeatability and accuracy.
The Rosand RH2000 system combines a number of advanced features associated with larger floor-standing models and it can be configured for research measurements through to Quality Control applications.
The IGA-001 gas sorption analyzer from Hiden Isochema is an efficient gravimetric analysis system designed for analyzing single component gas-liquid and gas-solid interactions. It can also be configured to monitor gas sorption processes from high pressure through to vacuum conditions.
Epsilon MODEL 3800 elongation extensometers are intended for testing of rubbers, plastics, and elastomers. With longer measuring ranges and unique design, they are capable of testing to failure with minimal sample interaction.
The IPLEX RX/ IPLEX RT are lightweight industrial videoscopes featuring the unique PulsarPic image processor to produce exceptionally high-resolution and bright images.
HORIBA offers an advanced microliter fluorescence measurement solution called Microsense.
The SediGraph® III Plus from Micromeritics is designed to determine particle size using the proven SediGraph technique with advanced instrumentation features to provide superior accuracy, repeatability, and reproducibility.
The New Sheen Glossmaster range of glossmeters have been designed mainly with the user in mind. They now offer greater versatility and ease of use, these instruments have far superior data handling capabilities than ever before.
Labthink offers mechanical contacting-based i-Thickness 4400 Auto-Feed Thickness Tester that comes with an auto sample feeding system.
Malvern Instruments has designed a premium particle characterization system called Zetasizer Nano ZSP.
The Liquid Calibration Unit (LCU) available from IONICON is a highly versatile calibration device designed for trace gas analyzers. This cost-effective instrument can be used to calibrate for compounds common in various fields of research, such as petrochemical analysis, food and flavor, breath-gas analysis, biotechnology, and environmental research.
The ChemStar™ is a bench-top instrument designed for catalyst and reactive surface characterization experiments. The fully automated dynamic flow adsorption analyzer features pulse chemisorption and temperature programming capabilities.
The Model 3975 extensometers from Epsilon can evaluate the Poisson’s ratio of concrete, asphalt, and rock samples by precisely measuring small diametral strains in large compression samples. They can be easily integrated with the Model 3542RA axial averaging extensometer.
PlasmaPro 1000- Stratum has been exclusively designed for passivation deposition applications during LED production.
The Bench Glossmeter is a simple to use compact instrument that analyze the surface finish of surfaces, in particular coated surfaces.
Malvern Instruments has designed a research grade dynamic light scattering system called Zetasizer Nano S.
Hamamatsu offers the IR-OBIRCH Analysis System which is a semiconductor failure analyzer.
Freeman Technology's Aeration Control Module allows the measurement of the flowability of aerated powders. The bulk properties of all powders are affected by the presence of entrained air, as it fills the spaces between the particles, or in the case of cohesive powders, is incorporated into agglomerates of fine particles. The amount of air present determines how the solids interact with each other and this has a direct impact on the flow properties.
The Malvern NanoSight LM10 instrument offers an easy-to-use, reproducible platform for nanoparticle characterization.
The new Morphologi G3 automated particle characterization system is a new analytical tool that can provide the answers you are looking for. The system combines the high quality images with statistically significant particle shape and particle size measurements.
Tinius Olsen offers a range of horizontal tensile testing machines in capacities of 5 kN (1,000 lbf), 25kN (5,000 lbf), 150 kN (30,000 lbf) and 300kN (60,000 lbf) for maximum tensile testing throughput and capability.
By means of applying constant load and compression frequency to the test specimen, this instrument could help the user to understand the history of Heat Built-up and dynamic fatigue poeperties of rubber compounds.
The TQC Cylindrical Bend Test is a highly rugged yet elegant testing instrument which can be used to determine the elongation, elasticity and adhesion of a paint film at bending stress.
Malvern Viscosizer TD is an automated tool that employs Taylor Dispersion Analysis for biophysical characterization and offers ultra- low volume, solution-based molecular size and stability measurement in addition to relative viscosity assessment using Poiseuille flow.
The Calypso® II biomolecular interaction system from Wyatt Technology interfaces with a Wyatt multi-angle light-scattering detector - miniDAWN™ TREOS® or DAWN® HELEOS® II to enable analysis of biomolecular interactions without the need for labelling or immobilization to establish affinity, accurate molecular stoichiometry and kinetics of self-assembly, aggregation or disassociation of macromolecular complexes with the aid of composition-gradient multi-angle light scattering (CG-MALS).
The revolutionary CCI MP-HS non-contact optical profiler ensures that one receives guaranteed results whatever the component and however quickly it needs to be analyzed.
Hydraulic conductivity and soil sorptivity are quickly calculated from water flow rates measured from two constant head levels using the HM-127 Permeameter.
Harrick Plasma offers the Basic Plasma Cleaner PDC-32G/32G-2 (115/230V) for surface cleaning and preparation procedures.
ULVAC’s Micro Powder Dry is an advanced technology developed for freeze drying (lyophilizing). The system completely dries liquids using spraying technique under vacuum.
The MET ONE R4800 and R4900 series remote air particle counters are reliable, affordable, and offer accurate data in particle monitoring systems.
PROTEC MINI sheets counter is the table version of PROTEC sheets counter. The optimization of the applied technologies, allowed us to create an easy, compact and economical machine suitable for medium-low production volumes (up to 1,000,000 sheets/month), keeping all the technical features, which make our sheets counters unique in the market.
The Vstar™ from Quantachrome is a high-throughput analyzer designed for evaluating up to four samples simultaneously. It features an excellent manifold temperature control that provides improved accuracy.
The Malvern NanoSight NS300 Instrument offers an easy-to-use, reproducible platform for nanoparticle characterization.
Epsilon Model 3544 circumferential extensometers provide measurements of circumference changes of a specimen when it is compressed.
The AV350 CNC vision system offers a granite base, 14" x 14" x 8" travel, Z-axis measuring, powerful MetLogix software control system, 12:1 zoom optics, several LED or fiber optic illumination options, standard machine pedestal and computer cart.
It is an equipment used in measuring the spectral transmissivity of ultraviolet, visible radiation, and infrared rays ranging from 190 to 1100nm. It can also measure a variety of optical emission spectrums and conduct real-time monitoring and display data on an LCD screen. It is also capable of performing a diverse array of measurements, such as Data Transmission with P Venture T & I Co., Ltd. specializes in the research, development, manufacture of Tint-Meters and Spectrophotometers, window tint meter, tint meter, uv spectrophotometer, visible spectrophotometer and visible transmission meter which are devices needed by the Korean National Police Agency, car mechanics, optic-related research centers, opticians, etc.
The m-VROC small sample viscometer from RheoSense sets new benchmark in the quality of viscosity measurements. The novel instrument with advanced technology provides economical flow management solutions through smart process quantification by characterizing rheological properties of liquids.

The CT3 is a low cost, but powerful, universal testing machine that offers both compression and tensile testing. It can calculate, through compression and tensile data, a number of physical properties that have proven to be highly correlated to human sensory evaluation of food and other consumer products. With six built-in test modes and ten memory slots for operator-protected tests with administrator rights, a wide choice of accessories and an optional software package, the CT-3 is perfect for most any physical testing requirements. The CT3 performs like a high end texture analyzer but at a fraction of the cost. Its uses can expand with your applications - or your testing imagination! The CT3's easy-to-operate design will have your R&D and QC up and running in no time.

The latest generation capillary flow pycnometers include the porometers 3G micro, 3G macro, 3Gz and 3Gzh. With the liquid expulsion technique pore size distributions and other related information are measured of through-pores in membranes and other filtration media.
The PlasmaPro 80 Cobra65 ICP etch system from Oxford Instruments provides flexible plasma etch and deposition solutions on a single platform with easy open loading option.
The Xactum XLS 40 Laser Sensors represent a quantum leap in laser micrometer technology. Digital Signal Processing (DSP) accuracies never before achieved are now available. No other laser micrometer on the market today is as advanced.
The standard model in Quantachrome's series of manually operated pycnometers is the Stereopycnometer. It offers a choice of two interchangeable sample cells (135cc and 20cc capacity) used in conjunction with a single reference volume.
The HMK-200 air jet sieve is a particle size analysis sieving machine designed for use in the laboratory. It utilizes advanced air jet technology to establish particle size distribution of dry powders.
The Epsilon Model 3540 deflection gages are extensively used for determining deformations in compression tests, three and four point bend tests, and a range of general purpose deformations.
The new, improved DV3T Touch Screen Rheometer from Brookfield Engineering has been specifically designed to allow users to control the temperature of Brookfield’s Thermosel System or TC Series Baths without using a computer.
MET ONE 7000 remote air particle counters offer high accuracy non-viable particle monitoring for cGMP/FDA compliance.
NETZSCH’s STA 449 F3 Jupiter® is a simultaneous thermal analyzer that combines the benefits of a true differential scanning calorimeter and a high sensitive thermobalance.
The 508 PV™ microscope spectrophotometer is for taking spectra and images of microscopic samples by UV-visible-NIR absorbance, reflectance, polarization and fluorescence.
The UV-Vis spectrophotometer features sophisticated next-generation INSIGHT software for computer and on-board control of this award winning instrument.
MET ONE 6000P pumped remote air particle counters offer ISO 21501 accuracy in fixed remote, continuous particle monitoring.
The Kinexus DSR+ is a dynamic shear rheometer designed to meet R&D requirements in the asphalt sector. It has an innovative ‘plug and play’ functionality that suits all measuring units and environmental control systems.
Thermotron offers a fully integrated RSL-16 Portable Shaker that can be used for performing HALT & HASS testing in a new or existing Thermotron chamber.
The Goodrich Flexometer is a testing equipment long used in a wide range of areas and measures the heat build-up characteristics of a vulcanized rubber test piece when applied test amplitude by constant deflection (strain) control.
The ultimate gas pycnometers for determining the volume and true density of catalysts, powders, ceramics, pharmaceuticals, building materials, carbons, rock core plugs, etc include the Pentapyc 5200e and the Ultrapyc 1200e.
HMK-22 Fisher Sub Sieve Sizer/Average Particle Size Analyzer (FSSS) is the right tool for subsieve analysis and is an excellent substitute for Fisher model 95.
The Kinexus DSR rheometer is a dynamic shear rheometer for routine analysis and QC testing in the Asphalt industry. The rheometer has a ‘plug and play’ function for use with all measuring systems and environmental control units.
Photon Control’s spectroradiometer system was designed specifically for LED Testing featuring high accuracy and performance. This spectroradiometer system is not only used for spectrophotometric measurements of emission sources of LEDs, but can be used for lamps and other illuminants.
The overall appearance of a product is influenced by color and gloss. The spectro-guide spectrophotometer is unique as it is capable of measuring these two attributes at the same time.
The Malvern NanoSight NS500 instrument offers a convenient, reproducible platform for nanoparticle characterization.
Very small and rugged, yet ultra-light weight, these units are widely used for testing small and delicate samples. Ideal for many biomedical tests, as well as for wire and thin sheet materials. Also great for low cycle fatigue testing where short samples are used.
Mahr’s MarVision video workshop measuring microscope QM 300 with M3 software is a tool that is capable of measuring and/or determining geometric elements such as lines, points, distances, intersection, and circles through automatic edge detection.
The WyattQELS™ dynamic light scattering (DLS) module is designed to be integrated into Wyatt DAWN® or miniDAWN™ multi-angle light scattering (MALS) detectors so as to establish particle sizes on-line together with the Eclipse™ asymmetric flow field-flow fractionation unit or basic size exclusion chromatography.
The Multipycnometer is a highly versatile manual pycnometer. It obtains its name from its multiple volume feature that offers three sizes of interchangeable sample cells: 135 cc, 20 cc, and 4.5 cc.
NETZSCH’s STA 449 F5 Jupiter is a top-loading system designed for thermogravimetry and differential thermal analysis.
The Direct Reading Ferrograph is a quantitative measuring instrument for a wear particle analysis lab. The instrument bridges the gap between spectroscopy, lubricant condition monitoring and chip detectors.
The Premium viscometer from Fungilab is monitored by the Fungilab Data Boss software and offers a unique and wide range of rheological applications. Data displayed include selected speed, selected spindle, viscosity readings, percentage of full scale range, shear rate, sample temperature, shear stress and density.
The DAWN® HELEOS® II multi-angle light scattering (MALS) detector is compatible with most HPLC, GPLC, FPLC or Eclipse FFF separation systems for ascertaining the absolute size, molecular weight and conformation of nanoparticles and macromolecules in solution without referring to any calibration standards.
Cole-Parmer PolyStat heated circulating baths and refrigerated circulating baths are available in multiple configurations to deliver the ideal combination of precision, versatility, and repeatability for your requirements. These next generation circulating baths feature touch-pad setting, making it easier to adjust the temperature to your requirements.
NETZSCH’s STA 2500 Regulus features a highly reliable, fully equipped instrument package for STA measurements up to 1600°C.
A Ferrography Laboratory for fast efficient, low cost separation and interpretation of wear and contaminant particles from used lubrication oils, hydraulic fluids, greases, coolants and fuels. In today’s modern power generation, manufacturing, refining, transportation, mining and military operations, the cost of equipment maintenance, service, and lubricants are ever increasing.
Pacer provides a range of red and near infrared Laser Diode Modules from Monocrom, with output powers in the range of 1mW to 3W. Typical wavelengths range from 405nm to 1550nm, enabling the modules to cover a wide field of applications including industrial and medical applications, imaging and laser lighting.
XEI Scientific offers the Evactron® CombiClean™ System that integrates external PRS (Plasma Radical Source) control and onboard vacuum cleaning chamber in a single, unified system.
The Profometer PM-630 advanced cover meter available from Proceq is a high-tech instrument designed to extend the application scope of the Profometer PM-600 cover meter with the Line and Area Scan Modes and a wide range of statistical views.
The AS-300 Hall Flowmeter (Funnel) supplied by AimSizer Scientific determines flow rate and apparent density of free-flowing metallic powders and other fine powders in a variety of particle size distributions with calibrated hall flowmeter funnel as per international standards:
This hydraulic pull-off type tester is fitted with a flexible hose, so that test can be performed on difficult to reach area, e.g. internal or external pipe surfaces.
The DelsaMax Pro and the DelsaMax Core are the most rapid of its kind, enabling simultaneous analysis of both particle size and zeta potential for sample volumes as small as 45µl, in below one second.
The Viscotek DSV (Dilute Solution Viscometer) directly measures the relative viscosity of dilute polymer solutions using sophisticated pressure sensing technology.
STACIS® III from TMC features sophisticated inertial vibration sensors, advanced piezoelectric actuators, and state-of-the-art control algorithms.
Epsilon MODEL 3909 extensometers are designed to measure dynamic modulus of hot mix asphalt in accordance with AASHTO TP062, and to measure axial displacements in the simple performance tests as outlined by NCHRP Report 465.
The Möbius® zeta potential analyzer from Wyatt Technology offers dependable, reproducible, and non-destructive electrophoretic mobility and zeta potential measurements of macromolecules less than 2nm in radius, as well as micron-size nanoparticles, in most aqueous buffers.
Admet single column electromechanical testing systems are ideal for determining the mechanical properties of a variety of materials in a divers set of applications. Systems are ideal for measuring the tensile, flexural, shear, creep, and compressive properties of materials, components, and devices.
TriStar II PLUS from Micromeritics is an advanced three-port surface area and porosity analyser which is ideal for use in both research environments and quality control.
Starrett offers a wide range of high speed roundness systems for the automotive, bearings and precision industries.
The existence of small concentrations of large particles is critical to the quality of different types of nanoparticle dispersions. These large particles can indicate that dispersion is unstable or will clog filters.
Oxford Instruments Plasma Technology has introduced an evolution in Batch Etch technology with the PlasmaPro1000 Astrea large batch etch system.
The Canty SolidSizer TS unit is a versatile tool for lab environments to determine particle size and shape, thereby eliminating the need for sieving. The system also has multiple configurations that allow color analysis and defect detection, as well as a tilting stage for flat particle analysis.
The Pundit PL-200 is an excellent ultrasonic pulse velocity (UPV) test instrument for examining the concrete quality and other materials such as wood, rock and ceramics.
The hydrotracer moisture analyzer is designed for accurately and effectively determining the moisture content of materials which use a chemical determination technique instead of a thermo-gravimetric technique.
The model 500L non-contact extensometer from Tinius Olsen is developed for measuring the extension of medium to high elongation materials, typically elastomers.
HIAC 9703+ liquid particle counters are extensively used in Pharmaceutical USP <788> quality control and research applications.
The method of electroacoustics is presently available for determining mean pore size in a range of sample types without mercury, without pressurized gases, without vacuum pumps and without the wait.
The PULSAR combines affordibility and automation and offers compact, bench-top catalyst characterization using automated flow methods of analysis.
The Hiden Compact SIMS tool is capable of rapid and easy characterisation of layer structures, surface contamination and impurities with sensitive detection of positive ions being assisted by the oxygen primary ion beam and provides isotopic sensitivity across the whole periodic table.
The presence of particles several standard deviations from the core populations of particles significantly influences the performance of inkjet inks and the stability of emulsions.
Hitachi's U-3900 double-beam single-monochromator system and the U-3900H double-beam double-monochromator system are high-performance, comprehensive, research-grade solutions for a range of applications.
The design of the PlasmaPro 100 Stratum PECVD system is such that it offers superior uniformity and high rate films.
The SpectroT2FM Q500 analytical ferrography laboratory from Spectro Inc. is a comprehensive analytical tool for the separation and analysis of wear particles and contaminants in used lubricant oils, coolants, hydraulic fluids and fuels.
The Hiden CATLAB is a bench-top microreactor and combined mass spectrometer system. It has been designed for fast and reproducible catalyst characterisation and reaction analysis.
SBS-2003 Digital Hydrometer/Density Meter is developed for measuring specific gravity and temperature by simply extracting a sample into the suction tube and pressing the start button.
Micromeritics' AutoPore IV 9500 Series characterizes a material's porosity by applying various levels of pressure to a sample immersed in mercury. The pressure required to intrude mercury into the sample’s pores is inversely proportional to the size of the pores. This is called mercury porosimetry, or often, "mercury intrusion."
The On-Line Profilometer (OLP) is a real-time, on-line measurement system for continuously monitoring key profile dimensions in complex tread and sidewall extrusions.
The PlasmaPro 100 highly configurable and reactive ion etching (RIE) system from Oxford Instruments is provided with standalone process chambers comprising load locks or as cluster configurations on hexagonal or square transfer chambers.
CAMECA's new generation Shallow Probe: the metrology solution for advanced integration of new processes.
The LFA 467 HT HyperFlash® is a type of light flash apparatus manufactured by Netzsch for precise thermal conductivity and thermal diffusivity measurements between RT and above 1250°C. The LFA 467 HT HyperFlash® is based on the well-established LFA 467 HyperFlash® technology.
Shimadzu’s RF-6000 spectrofluorophotometer is an upgraded system integrated with many new technologies. It is provided with new LabSolutions RF software, which offers measurement precision and ease of operation.
To determine the fogging characteristics of automotive interior trim of textiles, plastic or leather. Fogging is the residue deposited on interior glass of chemicals released from materials under specific temperature conditions. The 4-position chamber contains 4 x 400ml pyrex beakers, ground top and bottom, situated within individual heading blocks and subject to thermoelectric cooling.
Thermotron's Extreme AST Chambers are equipped with a fully featured AST-8800 Control System including product temperature control, Therm-Alarm, abort limits, vibration spectrum analyzer, full vibration analysis package, etc.
The PlasmaPro 100 Sapphire, available from Oxford Instruments Plasma Technology, is the latest breakthrough in single wafer etch technology.
Oxford Instruments provides a range of PCB and copper coating thickness gauges designed for non-destructive thickness measurement of foil, laminate, surface and through-hole copper for PCD assemblers and manufacturers.
The Insitec range is designed to overcome the rigors of the process environment. Insitec dry particle size analyzers make use of laser diffraction technology for measuring particles in the size range of 0.1 to 2500 µm.
CleanBench™ is an advanced industry standard 63 series vibration isolation lab tables manufactured by TMC. It is designed with the most updated, patent pending, improvements on TMC’s table tops with TMC’s advanced Gimbal Piston™ air vibration isolation system.
The Z-Plus temperature and humidity test chambers simulate a complete range of humidity and temperature conditions.
The Model 3575 transverse extensometer is used for measuring transverse or diametral strain on axially loaded specimens. It can measure samples of any diameter/width ranging from 0 to 1in.
Easy, quick, one-handed placement is the key to United's Model EZ Extensometer. Designed with a minimum number of moving parts, and "snap-on" mechanization, the unit combines simple operation with reliable, efficient measuring performance.
Malvern’s Hydro Sight™ is an advanced additional component designed for the Mastersizer range. Hydro Sight™ provides quick visualization and evaluation of liquid particle dispersion during a measurement process.
Arc Plasma Deposition (APD) is a unique form of physical vapor deposition that is used for the deposition of uniformly sized nanoparticles (2 nm to 9 nm dia) of platinum and other conductive metals onto micron-size powder substrates.
Imina Technologies has introduced miBot™ BT-11, a mobile micro-robot designed to perform different manipulation, sensing and positioning tasks at micro and nano scales.
The iSorb-HP volumetric sorption apparatus instruments enable automatic measurements of full desorption and adsorption isotherms over a broad range of temperatures and pressures
The Conscan objective surface profilometer available from CSM Instruments combines the 3D chromatic confocal technology and the traditional microscopy.
Sieving is a very cost efficient method of measuring particles, producing consistent, repeatable results and analysis. Standard Test Sieve diameters include 3", 8", 12", 200 mm, and 300 mm. All W.S. Tyler Test Sieves are fabricated in brass and durable stainless steel.
The Wallace Rapid Plastimeter measures the plasticity or viscosity of unvulcanised rubbers. The test is simple, clean and quick. The instrument is used in conjunction with the Wallace -MRPRA Ageing Chamber to determine the Plasticity Retention Index (PRI) of raw natural rubbers.
The SZ-100 nanopartica series instruments are flexible analytical tools for characterizing the physical properties of small particles. Depending on the configuration and application the system can be used as a particle size analyzer, or also used to measure zeta potential, molecular weight, (MW) and second virial coefficient (A2). Typical applications for the SZ-100 include nanoparticles, colloids, emulsions, and submicron suspensions.
PROMEX IL provides users with 100 % control of profile geometry during production. The PROMEX IL is the perfect solution for lines that produce at high speed and/or automated packing where manual control is hardly feasible. It is positioned after the saw. An intelligent camera checks profile contours on completeness respectively on conformity to set dimensions.
Harrick Plasma offers the PlasmaFlo gas flow mixer PDC-FMG/FMG-2 (115/230V) for fine control of process gas, process gas mixing, and monitoring of chamber pressure.
The Starrett-Bytewise Profilometer is as an automated, non-contact measurement system to displace checking with hand tools.
The Spectro-Visc is a fast, accurate, and cost effective instrument for the determinationn of kinematic viscosity in used oils and other fluids. The Spectro-Visc is a bench-top semi-automatic kinematic temperature bath viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant viscosities.
TQC has introduced a low voltage pinhole detector that uses the wet sponge method to detect defects on different types of coatings applied on ferrous substrates.
The DynaPro® Plate Reader II from Wyatt Technology offers high-throughput, automated dynamic light scattering (DLS) measurements on nanoparticle and macromolecular samples directly in situ in industry-standard 96, 384, or 1536 well microplates, using limited sample (1.5µL) and 5 seconds acquisition time per well.
Machida’s largest body type is particularly suited to longer borescope lengths up to 20 feet. The most outstanding feature of the smooth knob type scope is the huge, high definition images you’ll be able to achieve.
The IRTracer-100 FTIR Spectrophotometer from Shimadzu features an improved detector design and provides high sensitivity with a 60,000:1 S/N ratio. It has a rapid scan function that provides a maximum of 20 spectra in a second.
Gas lasers are high performance, low maintenance and highly reliable industrial tools.
Laser micrometers are designed for non-contact measurement and control of position and dimensoins (diameter, thickness, gaps) of technological objects as well as for measuring levels of liquid and bulk materials .
Particle Size Analysis has played a major role in ensuring the safety and efficiency of different pharmaceutical preparations. The US Pharmacopeia includes several particle sizing procedures for testing the safety of drugs.
MET ONE 6000 air particle counters offer ISO 21501 accuracy for continuous particle monitoring applications.
Oxford Instruments’ PlasmaPro 80 reactive ion etching (RIE) provides flexible reactive ion etch solutions on a single platform with suitable open loading option. It is a compact, small footprint device that is simple to set up and use without compromising on the quality of a process.
The DM5E series wall thickness gages enables you to accomplish a large number of demanding tasks, especially with remaining wall thickness measurements on components subjected to corrosion and erosion.
The Sinar AP Moisture Analyzer is world renowned for quickly and accurately determining moisture content in coffee. From parchment and green bean to roasted and ground coffee, the Sinar AP allows you to determine the quality of your coffee quickly and accurately without having to use charts, scales or thermometers. The Sinar’s portable and rugged design ensures that repeatable and reliable testing can be done anywhere, in the field during harvest or during the roasting and grinding process. Not only is the Sinar accurate, all calibrations have been verified for accuracy and meet industry requirements, it offers crucial moisture readings in just 6 seconds.
The ultra compact MICRO range is designed for testing small components and sub-assemblies, takes up no more space than a desk jotter and has an attractive appearance as it is constructed from stainless steel.
The 73 series includes four new spectrophotometers to the extensive Jenway range. These spectrophotometers make use of icon driven software and have an enhanced navigation system for easy and intuitive usability.
The original Rapid RH® design revolutionized the way the floor covering/coating industry looked at conducting the ASTM F2170 relative humidity test method for concrete slabs. The Rapid RH® 4.0 concrete moisture test carries on this tradition of fast, accurate, easy relative humidity moisture testing in concrete slabs.
SensoPRO LT from Sensofar is software that, when combined with their S neox and S mart optical profilers, assists in carrying out rapid and simple quality control in a production line.
The Talysurf PGI Dimension from Taylor Hobson is an ideal dedicated metrology instrument for precision measurement of 3D form of shallow and steep aspherical lenses and moulds from <2mm and up to 200mm diameter.
The Taylor Hobson CCI HD leads the world in the next generation of combined thin film and dimensional optical profilers. This instrument merges world leading non-contact dimensional measurement capability with advanced thin and thick film technology. The CCI SunStar is able to meet the most demanding application challenges, including 1st and 2nd generation Solar P-V, High power LED, Displays and Vacuum Coatings.
The LaserScan is a surface profilometer for fast 3D laser measurement in quality assurance and process control. It represents a significant step to providing affordable non-contact surface profilometry without sacrificing accuracy. The key to the system design is the modularity of component selection.
The 1200 series offers conventional laser micrometers with the precision of a fine measurement shop suitable for use in manufacturing applications.
The FT-F1 fogging tester from Labthink is a testing instrument used for analyzing the fogging properties of volatile substances present in high temperature materials such as nonwovens, adhesives, elastomers, leather, textiles, polyurethane and plastic articles.
Epsilon MODEL 3542 axial extensometers are general purpose instruments suited for compression, axial tensile and cyclic testing.
Semi-automated wafer characterization system for determining wafer thickness, TTV, bow warp, site and global flatness measurement. The Proforma 300SA can be used for all wafer materials and accommodates 200mm and 300mm wafer diameters.
Malvern’s Hydro SV liquid dispersion unit is a simple tool designed for conducting particle size analysis with small volumes of sample and dispersant. The Hydro SV can handle small volume wet sample dispersion and can be used with the Mastersizer 3000 range of laser diffraction particle size analyzers.
The Optofab3000 includes high reflective and anti reflective coatings and is configured similar to the Ionfab300Plus.
The VB400 vertical projection comparator enables parts to be conveniently laid on a glass insert in the workstage.
In comparison with conventional loss-on-drying techniques, rapid loss-on drying instrumentation has proven to offer a highly desirable method of moisture measurement. The reduction in test time and the ease of use increases manufacturing efficiency, at the same time reduces energy costs.
The ASAP 2460 Surface Area and Porosity Analyzer from Micromeritics is an expandable system designed for exceptionable performance and high sample throughput. The basic unit is a two-port master control unit.
Malvern Instruments offers a low-cost zeta potential analyzer called Zetasizer Nano ZS90.
AimSizer Scientific’s AS-3012 BET surface area and pore size analyzer is designed to perform surface area analysis according to ISO 9277 standard. The unit is divided into vacuum air path system, modules of control system, and module of data analysis, acquisition, transmit and storage. Each module ensures the unit’s stability.
Epsilon’s standard calibrator has a resolution of 0.001mm and measuring range of 50mm. With the digital display and autozero button, the calibration of extensometers is greatly simplified.
The Zetasizer Helix provides structural information at the molecular level by which it is possible to obtain understanding about the formation of oligomers and also aggregation and unfolding processes of biopharmaceuticals.
The model 6700 covers the visible range of the spectrum and has a 4nm bandwidth. Models 6705 and 6715 cover the UV/visible range of the spectrum and have a 4nm and 1.5nm bandwidth respectively.
The NETZSCH Photo-DSC 204 F1 Phoenix®, Differential Scanning Calorimeter, works in the temperature range from -100°C to 200°C. The instrument has a gas-tight measuring cell and the purge gas control is regulated by a mass flow controller (MFC). For our Photo-DSC 204 F1 Phoenix®, most standard industry or laboratory lamps for cationic or radically curing material systems can be used.
The Laser particle sizers ANALYSETTE 22 ensure precise determination of particle size distributions, by Static Laser Scattering in production and quality control as well as in research and development.
Brookfield Engineering’s RST Plus controlled stress rheometer performs rheological analysis via controlled stress measurement, thereby providing excellent viscosity profiling, thixotropic response, creep analysis, and yield stress determination.
The Model 3648 extensometer is designed for use with split type materials testing furnaces or induction heaters in low strain applications.
The Quantachrome Monosorb uses the rapid dynamic flow method for determinations of single-point B.E.T. surface area.
Chemplex Industries has designed an advanced and automated briquetting press dubbed “AIDA” 40 Ton SpectroPress.
The UltraMap 200-BP is a flexible wafer measurement system that is capable of measuring wafer thickness, shape and flatness using MicroSense's patented non-contact auto-probe back pressure technology.
The miniDAWN™ TREOS® multi-angle light scattering (MALS) detector is compatible with most HPLC, GPC, Eclipse FFF or FPLC separation systems for measuring the absolute molecular weight, size as well as compliance of macromolecules and nanoparticles in solution without referring to calibration standards.
The Hitachi U-4100 is an optical material characterization system for measuring optical materials such as lens, glass, prism with the capability to accommodate large samples.
The Form Talysurf i-series is a high precision instrument range designed with instantaneous surface finish and contour measurement.
Hiden Isochema’s IGA series are excellent tools for sorption science. The IGA tools are based on the gravimetric method and precisely measure the dynamics and magnitude of gas and vapor sorption on materials.
The Hitachi U-5100 makes use of ratio beam optics to give exceptional stability for a host of applications including kinetics, and offers full scanning capabilities.
DS7800 digital density meter from Kruess measures density, specific gravity and concentration of liquid solutions within the range of 0.00000 - 1.99999 g/cm³.
Creaform’s HandyPROBE arm-free probing system is designed to provide highly accurate measurements of up to 22µm. The system provides the user with complete freedom of movement, thereby ensuring better productivity and quality control.
The new ARES-G2 is the most distinctive rotational rheometer for advanced research and material development.
Micromeritics new AccuPyc 1340 Series Pycnometers are versatile, fast, fully automatic analyzers that provide high-speed, high-precision volume measurements and density calculations on a wide variety of powders, solids, and slurries.
The Mikro ACM air classifier mill, functioning in the medium to fine size reduction range, delivers precise particle size due to variable-speed integral air classifier, and attains the smallest amount of ultra fines with a sheer particle size distribution.
Based on the Rotothinner design, this Sheen Instruments Gel Strength Tester is specially suited to assess the yield strength and consistency of thick paints and other materials such as gels and putties etc. A 250 ml can containing the sample is magnetically fastened onto a turntable, which is loaded with a calibrated spring displaying an engraved scale of 0-450 gm/cm.
Creaform’s MetraSCAN-R optical CMM 3D scanning systems are fast, precise, robot-mounted scanning solutions specifically designed for automated inspection of parts on shop floors and production lines.
NOVA Rheometer from REOLOGICA Instruments features a unique "Net- Zero" bias bearing system. This null balance system allows for Nano-Torque and Nano-Strain measurement control and analysis.
The Melt Index Tester available from Hung Ta is a quality and durable apparatus, which can be used for calculating the extrusion rate of PVC, TPRs, TPEs and other molten thermoplastic materials, as outlined in ASTM D1238 “Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer”.
HORIBA's LA-300 Laser Diffraction Particle Size Distribution Analyzer is the ideal combination of performance, price, and packaging. Based on the advanced optical design of previous LA-series analyzers, the LA-300 strikes a harmonious balance between high-functionality, easy operation, low maintenance, and cost-effectiveness. The optimized design allows for a compact optical bench, resulting in an efficient use of bench space, while preserving the accuracy, precision and resolution that HORIBA's analyzers are famous for.
The 7310 spectrophotometer uses icon driven software and has an improved navigation system for easy and intuitive usability. The 7310 features measurement modes for absorbance, % transmittance, concentration, spectrum scanning, kinetics and quantitation.
The Viscotek TDAmax system or as a stand-alone module, the Viscotek triple detector array (TDA) incorporates RI, light scattering, viscosity detectors.
The S neox from Sensofar has been designed for non-contact optical 3D profiling. It uses a high-resolution CCD sensor of up to 1360 x 1024 pixels, along with high-resolution displays of 2560 x 1440.
The DynaPro® NanoStar® from Wyatt Technology is a cuvette-based dynamic light scattering (DLS) device used for studying promiscuous inhibitors, protein solutions, and many types of macromolecules or nanoparticles in solution.
The Nexview 3D optical surface profiler from Zygo can measure topography of almost any surface, from smooth to rough with sub-nanometer accuracy, independent of field of view.
The Parsum IPP70SE is compact, lightweight and easy to install and is an intrinsically safe probe for real-time size and velocity measurements for solid particles up to 6000 µm in size.
The PlasmaPro 80 ICPCVD65 from Oxford Instruments is a compact open loading tool designed to handle plasma enhanced chemical vapour deposition (PECVD), and manufacture high quality uniform dielectric films.
As non-Newtonian fluids exhibit different viscosities relative to the shear rate. The Sheen Cone and Plate Viscometer complies to BS 3900;A7, ASTM D 4287 and ISO 2884.
The Original Fungilab Viscometer is an important tool developed for viscosity measurement. The tool package contains viscometer head with serial number, 3 levelling adjustment for stand, boss head, standard spindles, spindle rack, spindle protector, power supply cable, calibration certificate, and operating manual.
The Proceq Profoscope is a versatile, fully-integrated rebar detector and cover meter with a unique real-time rebar visualization allowing the user to actually “SEE” the location of the rebar beneath the concrete surface to a maximum depth of 180 mm. This is coupled with rebar-proximity indicators and optical and acoustical locating aids.
The Rosand RH7 and RH10 are used in hundreds of research laboratories globally and the robust H frame design permit operation under ultra-high loading conditions, as well as providing optimized space for multiple accessory configurations.
PVS-5000 from Semilab is a high throughput PV wafer inspection and sorting system. The PVS-5000 is field proven and integrates high reliability wafer handling with PV metrology to enable a turnkey solution for incoming wafer sorting.
Choosing the best possible sampling method is crucial when solving a specific analysis task. With the MPA, you have a complete solution at hand for your method development. The modular and compact instrument can easily be adapted to your needs. If at a later stage new applications arise, simply have the required sampling tool added; all combinations are possible at any time. The robustness of the instrument allows it to be used in the laboratory and factory floor. The MPA can be connected to your laptop via Plug & Play Ethernet and can even be placed on a utility cart to improve its mobility.
The Model 3560 Extensometer from Epsilon is a single integral unit that can be configured to provide lateral (transverse) strain and averaged axial strain measurement simultaneously.
Archimedes is a novel, high-performance system that harnesses the resonant mass measurement technique so as to sense and count particles in the size range 50nm - 5µm and to measure particle mass and size.
TA Instruments provides a range of tools for measuring thermal diffusivity up to 1200°C using the flash method. This method enables measuring specific heat capacity and thermal conductivity of materials with numerous thermal properties.
Olympus' MX61L/ MX61 semiconductor inspection microscope offers excellent clarity and image resolution using observation techniques such as infrared, fluorescence, differential interference contrast (DIC), dark-field and bright-field. It consists of specially designed IR objective lenses for imaging defects below the glass/silicon surface.
The new Air Jet Sieve AS 200 jet available from Retsch is specifically designed for sieve cutting of powdered materials that need efficient dispersion and desagglomeration.
Oxford Instruments Plasma Technology has been a leading provider of high-volume batch plasma tools in the production market for more than 15 years, with a wide installed base of HBLED production solutions in operation.
Based on the popular traditional KREBS method, using a weight-driven rotating paddle to sense the paint viscosity at a constant 200 rpm, this modern digital viscometer provides automated motor operation, without weights & pulley, allowing accurate direct reading in KU (Krebs units), mPa.s (cP) or g (gram).
The ProteomeLab XL-A/XL-I in-solution characterization of proteins, oligomers, aggregates, particles, colloids, and small structures delivers accurate results you can rely on time and again. In-solution characterization allows for testing in native conditions, meaning you determine the sample testing environment that best suits your needs.
BYK-Gardner offers a range of bubble viscometers and viscosity cups to determine the kinematic viscosity of coatings, resins, and ink.
Creaform’s HandySCAN 3D™ handheld scanners are designed to handle 3D measurements of physical objects and meet the requirements of product development and engineering professionals.
AS-2011 Laser Particle Size Analyzer uses the Mie Scattering principle to precisely determine the particle size distribution from 0.1 to 500 micrometers. This equipment has several unique advantages. A robust laser diode and innovative photocells optimize the precision of static light scattering giving the AS-2011 a longer operational lifetime. A patented optical bench prevents light path deviation, one of the major technical problems in the industry of particle size analysis.
AimSizer Scientific’s HMK-CD5 is a new generation of particle size analyzer developed according to ISO 13320 and ISO 13321 standards. The system works on two advanced theories: full-course Mie scattering theory and photon correlation spectroscopy theory.
The Hitachi F-7000 fluorescence spectrophotometer features excellent performance, functionality and reliability.
The SA 3100 with automated dewar lift is a complete pore size and surface area anlysis system with integrated outgassing stations and vacuum pump and is highly accurate. It features continuous saturation pressure measurement, has a minimum manifold volume to enhance sensitivity, and performs a multipoint helium free space measurement, to improve repeatability and accuracy.
Thermal conductivity and thermal diffusivity are the most important thermophysical material parameters for characterizing the thermal transport properties of a material or component. The Laser Flash technique is currently the most widely accepted method for precise measurement of the thermal diffusivity and the LFA 427 is the number one instrument on the world market. High precision and reproducibility, short measurement times, variable sample holders and defined atmospheres are outstanding features of LFA measurements over the entire application range from -70°C to 2800°C.
The W130i is a breakthrough, high sensitivity dynamic light scattering system for size and molecular weight measurement of proteins, bio-molecules and sub-micron particles. The W130i combines ultimate measurement performance with an economical benchtop footprint, rugged durability and supreme user convenience.
The Tinius Olsen MU Series of automatic digital compression testers features rugged frames for high stability while testing concrete cylinders or cubes.
The Hand-Held Densito 30PX Allows for Efficient Density Measurements.
Used in conjunction with the detachable Hygrostick probe, the Hygromaster is an easy to use, versatile hygrometer.
Controlled stress dynamic mechanical tester for cured rubber specimens. Measures heat generation and permanent set in compression as well as blow-out time. Also measures dynamic mechanical properties in compression.
MaxMile EpiEL system is a virtual LED device fabrication & characterization system which can be used to measure LED device parameters directly on epiwafers. Without any costly and time-consuming device fabrication, yet as through a finished device, EpiEL reveals not only the electro-luminescence (EL) but also the electrical properties of the material.
The ANALYSETTE 28 ImageTec and ImageSizer are tools designed for measuring particle size and shape and are suitable for all related applications.
The ViscoStar® II from Wyatt Technology is an on-line differential viscometer that can be coupled with the miniDAWN™ TREOS® or DAWN® HELEOS® II in SEC-MALS.
The Epsilon MODEL 3590 axial extensometer features 0.8µinches or 20nm resolution with a measuring range of 2 inches or 50mm.
The Go!SCAN 3D™ series provides users with simple, portable 3D scanning tools which can measure in a fast and consistent manner. With these handheld 3D scanners, 3D data can be captured in full color.
The Apollo plasma cleaning system is a compact, inexpensive and versatile system, which can handle 100-300mm wafers. By employing either ICP or microwave and RF bias power as needed, difficult to remove layers of resist can be removed at low temperatures.
Karl Storz Mini Borescopes can reach inspection areas through holes as small as 1 mm (.025") in diameter. The bright images eliminate shadows and false indications to assure more accurate inspections as well as high quality images for documentation.
The Particle Insight available from Particulate Systems is an advanced image analyzer that is suitable for those applications where the shape of raw materials is an important criterion.
The only portable viscometer as stable in process as in lab. This portable viscometer was especially developed for field, factory and laboratory viscosity measurement.
HORIBA's CAMSIZER Digital Image Processing Particle Size and Shape Analysis System provides rapid and precise particle size and particle shape distributions for dry powders and bulk material in the size range from 30µm to 30mm. This technique provides a wide variety of information about the sample, from a general size measurement, to shape parameters that can be closely correlated to specific performance characteristics. This also allows correlation to existing data from techniques as diverse as sieving and sedimentation.
The Quadraline family of laser diameter micrometers are suitable for on-line measurement of any continuously extruded or rolled product with shape or form.
The Wells-Brookfield Cone/Plate Viscometer/Rheometer gives researchers a sophisticated instrument for routinely determining absolute viscosity of fluids in small sample volumes. Its cone and plate geometry provides the precision necessary for development of complete rheological data.
The Poroscope Plus from NDT James Instruments is suited to the field test for air and water permeability of concrete using the Figg technique.
The 20/30 PV microspectrophotometer is suitable for taking images and spectra of microscopic samples by reflectance, UV-visible NIR absorbance, fluorescence and Raman polarization.
The IGAsorp-CT system is a variation of the basic IGAsorp, which enables the analysis of uptake and kinetics of moisture sorption at high temperatures more rapidly and precisely than other techniques.
Hitachi F-2700/F-2710 fluorescence spectrophotometers are available in two configurations based on one’s specific needs. It is possible to use the F-2700 as stand-alone and also PC-controlled.
The AutoPore V series porosimeters from Micromeritics are based on the mercury porosimetry analysis method, in which mercury is introduced into a porous structure under closely monitored pressures.
The Parsum IPP 70-SL probe is easy to install and lightweight and comes in lengths up to 4 m and delivers in situ, real-time size and velocity measurements for solid particles up to 6000 µm in size.
The NewView 7000 Series optical profilers are powerful tools for characterizing and quantifying surface roughness, step heights, critical dimensions, and other topographical features with excellent precision and accuracy. All measurements are nondestructive, fast, and require no sample preparation. Profile heights ranging from < 1 nm up to 15000 µm at high speeds, independent of surface texture, magnification, or feature height!
CALIX series is the first LAP product family for thickness measurement in one single sensor housing. They can be used instead of applications consisting of displacement sensors and measuring frame without the need for temperature control and frequent recalibration.
Particulate Systems' HPVA II Series of adsorption analyzers are designed to obtain high-pressure adsorption and desorption isotherms using the static volumetric technique.
The CV-Series vibration chambers provide rapid temperature change rates with combined temperature, humidity, and/or vibration environments.
Mahr has enhanced its range of MarCal digital calipers with the addition of wireless data transmission feature. The company used a proven wireless technology on the new MarCal digital calipers to transmit data to a small i-stick receiver, which resembles a common USB flash drive.
Brookfield’s DV1 viscometer has a new shape and a larger display to enable easy reading. It has been designed with a user interface comprising three hot keys for rapid access to spindle selection, test speed and other related operations.
The Callidan MoistScan MA-500HD On Belt Moisture Sensor is suitable for a wide range of applications that require on belt moisture analysis and have a high density content. Examples of some applications include, but not limited to; lead concentrate, zinc concentrate, fertiliser, heavy minerals etc.
The Starrett HB400 horizontal optical comparator offers exceptional performance with a fully-usable 16" diameter viewing screen, a 21"x5" workstage, 12"x6" of stage travel, and high 110lb workload capacity. Linear glass scales provide 0.00002" (0.5µm) of resolution.
The Autosorb-iQ is a highly sophisticated gas sorption analyzer available with one or two physisorption analysis ports, both of which can be equipped for low pressure micropore analysis.
The CCI MP-L interferometer is an innovative tool that provides high quality, 3D measurement. Automatic surface detection is possible with AutoFringeFind. This feature enhances inspection throughput by eliminating the need for manual assembly.
The SE-Series of environmental test chambers from Thermotron offers excellent performance, enabling users to experience precise results and improved productivity.
The new Dektak XTL stylus profiler available from Bruker is designed to accommodate samples up to 350mm x 350mm, bringing the renowned Dektak reproducibility and repeatability to panel and large-format wafer manufacturing.
Thermotron’s DSX-Series of electrodynamic vibration test systems are capable of performing sine-to-shock, random, sine-on-random, and random-on-random tests.
The i-Gastra 7100 gas permeability tester from Labthink is designed to analyze gas transmission rate of high barrier materials, aluminum foils, sheeting and films.
LSM 700 is a confocal laser scanning microscope which is suitable for non-tactile measurements of materials samples. It can be accurately and easily operated without tactile contact.
The DV3T rheometer available from Brookfield Engineering features a 7” full color touch screen that easily shows all test parameters together with measured values for temperature, viscosity and yield stress.
The Grace Instrument M7500 Ultra HPHT Rheometer is a coaxial cylinder, rotational, high pressure, and high temperature rheometer. It is engineered to measure various rheological properties of fluids (including API HPHT tests) under a range of pressures and temperatures, up to 30,000 psi and 500 °F. An optional cement module is also available for testing the rheology of cements.
WITec's new True Surface Microscopy option (patent pending) allows confocal Raman imaging guided by surface topography. Confocal microscopy is often desirable due to its suppression of out-of-focus light but can be challenging when analyzing large or rough surfaces. In these cases, only those points that are in focus contribute to the image.
The model 3442RA1 miniature averaging axial extensometers from Epsilon are strain gaged devices used for performing tensile or compressive strength tests on concrete, small rocks, and other small compression samples.
The TriPhemos Time-Resolved Imaging Emission Microscope is suitable for analyzing the circuit timing by detecting the faint light which is generated when CMOS transistors operate using a two-dimensional infrared detector, thus analyzing the device timing with picosecond precision.
The Accusizer 780 AD system, available from Particle Sizing Systems, is an ideal solution for the quality lab that focuses on minute quality.
The LS 13 320 series is the most versatile and sophisticated laser diffraction particle size analyzer available today. Using the Fraunhofer and Mie theories of light scattering, the LS 13 320 series offers the highest resolution, reproducibility and unsurpassed accuracy.
Malvern’s Kinexus pro+ rheometer has been specifically designed for rheological characterization of dispersions, soft solids and complex fluids.
The FT-F1 Fogging tester is designed to test the fogging characteristics of automotive interior materials in accordance to DIN 75201, ISO 6452, SAE J1756. Testing the fogging characteristics of interior materials in auto mobiles has become increasingly important in order to minimize harmful contaminants and ensure safe driving conditions.
The Xigo Nanotools Acorn Area™ is an innovative particle analyzer designed to study wetted particle surfaces dispersed in any type of liquid. This novel, patented technique is based on nuclear magnetic resonance (NMR) and offers many advantages in comparison with conventional first generation particle analyzers.
The Zetasizer WT from Malvern is a fully automated on-line zeta potential measurement system providing lab quality results. It offers real-time monitoring of efficient charge neutralization and flocculation process performance.
The TGA701 Thermogravimetric Analyzer, is an instrument that provides reliability and functionality. Expanded operational controls improve temperature accuracy across the entire range (up to 1000°C), while a re-designed pneumatic carousel assembly improves reliability by eliminating oscillation and increasing position accuracy for automation. PC-controlled Windows®-based operating software also supports compliance to 21 CFR Part 11 for a closed analytical system.
Mahr’s MarVision workshop measuring microscope MM 320 with M3 software is designed to handle measurement of electronic parts such as printed circuit boards, small features on micromechanical parts, 2D profile measurements on plastic and metal parts, and production control of turned components.
The Instron® CEAST HV500 is the latest instrument design to perform HDT and VICAT tests at high temperatures, up to 500°C, making this instrument ideal for research and quality control applications as it is ensuring the capability to test the new generations of techno-polymers, characterized by their excellent properties at high temperature.
The Ohaus Moisture Analyzer (MB45) is the full featured, compact moisture analyzer for every budget! Perfect for environmental, quality control, food and beverage, chemical, pharmaceutical industries, and more, this fast, rugged analyzer gives you the flexibility you need and the accuracy you require for moisture determinations.
The NanoPlus nano particle size & zeta potential analyser from Particulate Systems employs photon correlation spectroscopy and electrophoretic light scattering techniques to determine particle size and zeta potential.
The SpectroLNF Q200 (LNF-Q200) is a bench-top instrument that performs five measurements simultaneously including: particle classification, particle count, dynamic viscosity, soot % and free water detection.
The GeoPyc 1360 Envelope Density Analyzer rapidly measures the envelope density of porous objects of irregular size and shape by using a unique displacement measurement technique.
The PlasmaPro 800 Stratum from Oxford Instruments is large capacity, open loading plasma enhanced chemical vapour deposition (PECVD) system.
Epsilon Model 3565 bolt extensometers measure small measuring strain ranges in applications such as yield measurement and proof load testing of bolts. Hard conical points are used for contacting the bolt at the center of the head and at the bottom.
The new Elzone® II 5390 determines particle size by using the highly accurate and reproducible electrical sensing zone method which is widely recognized as a highly effective method of counting and sizing a wide variety of organic and inorganic materials.
Quantachrome's UltraFoam 1200e Gas Pycnometer is designed specifically for the characterisation of foams.
Oxford Instruments offers a range of paint and powder coating thickness gauges designed specifically for measuring coating thickness over ferrous and non-ferrous metal substrates.
The advanced Outotec PSI® 500 technology provides you with real-time information, which can be used to significantly improve your operations. Particle size monitoring and control improves throughput and helps to maintain target grind in the grinding circuit. Additionally, it improves the downstream process by minimizing reagent consumption, increasing recoveries and making thickening and filtration more effective.
The alpha300 R provides a still unmatched level of Confocal Raman Imaging capabilities focusing on high resolution as well as high speed spectrum and image acquisition.
Process engineers want film thickness measurements fast and without a lot of hassle. Our innovative Thickness Imaging™ technology allows Filmetrics to offer easy recipe set up and industry-leading throughput, at a mere fraction of the cost of competing metrology tools.
The MET ONE HHPC 6+ is a full featured six channel handheld particle counter developed for a wide variety of tasks in high technology cleanroom manufacturing environments such as Flat panel display or semiconductor manufacturing.
Epsilon MODEL 3910 Extensometers are intended to test asphalt core specimens having a diameter of 4 to 6 inches. They perform strain measurement in accordance with test method requirements prescribed by the U.S. Federal Highways SHRP program.
Mahr’s Pocket Surf portable surface roughness gage is a low-cost tool that is designed exclusively to handle traceable surface roughness measurements on numerous types of surfaces.
The TalyMaster has been specifically designed to measure multiple parts for Contour, Roughness and Roundness in a single automated operation, increasing throughput and reducing cost.
The 3816 Bench Hardness Tester offers easy, fully automated testing procedures and provides highly sensitive and accurate readings.
The Saturn DigiSizer IITM from Micromeritics is the first commercially available particle sizing instrument to employ the light scattering analysis technique that utilizes advanced digital detection technology to deliver exceptionally high levels of resolution, accuracy, repeatability, and reproducibility.
The PlasmaPro Estrelas100 deep silicon etch technology, available from Oxford Instruments, has been designed to provide excellent process performance.
The Series 3 offers very high flexibility on cases where extreme temperature testing and climatic control are needed.
Zygo’s NewView 7300 white light interferometer is a 3D optical surface profiler, which is exclusively designed for differentiating and quantifying topographical features such as critical dimensions, surface roughness, step heights, etc.
The Rotothinner viscometer uses a disc or ball shaped rotor to determine the viscosity of the sample under test. The results are displayed on the LCD screen in POISE units.
The SOLAIR 1001+ airborne particle counter offers a sensitivity of 0.1 micron with a flow rate of 0.01 CFM (0.283 LPM) and a wide dynamic range up to 20.0 microns.
The advanced new Tinius Olsen video extensometer has been developed for non-contact, accurate measurement of specimen strain and is offered in a range of configurations.
Malvern Instruments offers a low-cost particle size analyzer called Zetasizer Nano S90. This entry level system is perfect for applications where similar results to a legacy system with 90 degree scattering optics are needed.
The PlasmaPro System400 is used for single-wafer or batch PVD processing and offers the flexibility of pulsed dc, dc, rf and reactive magnetron sputtering. It finds applications in production or research & development.
The HDV series comprises two models having stage sizes 300x150 or 400x150mm of X-Y stage travel.
The MET ONE A3432 manifold system is developed for operation with the MET ONE 3400 series portable air particle counters.
The new dilatometer DIL 402 Expedis Select and Supreme offer state-of-the-art dilatometer technology and are desiged for a wide range of sophisticated applications. All instruments of the DIL Expedis series feature the revolutionary NanoEye measuring cell; a new dimension in measuring range and accuracy.
The Pundit PL-200PE deploys advanced pulse echo technology to extend the ultrasonic application to objects where access is restricted to a single side.
Laser Scan Micrometer LSM-9506 Series 544-Bench Top Type Non-contact Measuring System.
The new Fluke 983 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 983 is the portable solution for determining airborne particle concentrations. Use the Fluke 983 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program.
Concrete RH/Moisture Meter Kit with BluePeg Sensor Relative Humidity and Moisture Meter Test Kit for concrete slab provides compliance with ASTM F2170-02 standard. Kit consists of Meter, (1) Reusable RH Blue Peg Sensor, (10) RH sleeves, cable and case.
HDV640W: HD VideoScope with Wireless Handset/Articulating Probe. Inspection Camera with Wireless Handset & 6mm Semi-Rigid, Articulating (320°) Probe (1m).
Instron offers an advanced, high-resolution automatic contacting extensometer that is suitable for a wide range of materials such as plastics, composites, metals and elastomers.
The Zetasizer Auto Plate Sampler automates Dynamic Light scattering measurements from samples in industry standard 96- or 384-well plates to add the power of advanced light scattering analysis to your laboratory. Automating the measurement procedure means that you can simply insert your plate of samples and press "start".
The DynaFiz interferometer available from Zygo is an advanced optical system that is exclusively designed for carrying out precise metrology of optics in the presence of intense vibrations and turbulent air.
The LE Model Laser Extensometers are precision, wide-range instruments specifically designed for accurate, non-contact measurement of strain on various materials under tensile or compressive conditions.
Epsilon MODEL 3475 is a miniature extensometer that measures transverse or diametral strains on thin or small specimens.
The Insitec Spray is designed to withstand the rigors of the process environment and makes use of laser diffraction technology to measure dry particles and droplets from 0.1 µm to 2500 µm.
The NPFLEX™ 3D Surface Metrology System from Bruker offers high flexibility, measurement capabilities, and superior performance to precision manufacturing industries, ensuring rapid ramp-up times, excellent product quality and improved productivity.
The Acorn Drop™ particle analyzer from XIGO Nanotools deploys patented NMR technology for the rapid measurement of foam droplet size and distribution. The Acorn Drop does not require the extensive sample dilution that is needed with conventional particle sizing techniques such as laser diffraction.
The brinell optical scanning system, BOSS enhances the quality control with sophisticated data acquisition and analysis capabilities and determines the brinell impressions faster, more accurately and consistently than ever.
The Instron® capillary rheometer systems of the CEAST SmartRHEO Series are specifically designed for R&D, and for advanced quality control of thermoplastic materials, as they accurately determine the rheological properties of polymer samples over a wide range of shear rates and testing conditions.
The Pro Viscometer series provides accurate and professional viscosity results and the measurements are customized. The series has 10 language options. The program features are time to torque, time to stop, 10 working memories, programmable multistep/ramp and a unit converter.
Equipment for determination of windscreen fogging according to ISO 6452, DIN, VOLVO and SAAB and other automotive standards. The equipment has a compact design with the heating bath and cooling bath integrated in one casing.
Economy video borescopes serves as a good handy flexible video inspection tools for various type of jobs.
The PlasmaPro 100 inductively coupled plasma chemical vapour deposition (ICPCVD) system is designed to produce high density dielectric films at low temperatures with the capability to deposit onto damage sensitive surfaces.
The LE-05 and LE-15 laser extensometers from Epsilon are high precision. non-contacting instruments developed for strain measurement in materials testing. The self-contained extensometers use advanced laser diode technology.
Creaform’s MetraSCAN 3D optical CMM scanning systems provide precise scanning and probing solutions.
The Evactron® SoftClean™ Chamber available from XEI Scientific enables users to pre-clean holders and specimens and thus helps eliminate sources of contamination prior to introducing them into the microscope chamber.
Malvern Instrument’s Spraytec laser diffraction system enables measurement of spray particle and spray droplet size distribution for effective product development of aerosols and sprays.
The Hitachi UH5300 is a novel, double-beam UV-visible system. It includes the latest IT technology and can be operated in a wireless configuration from an iPad® or PC, or wired directly to a PC.
The Baugh & Weedon AUDIT 207 UT thickness gauge has an ergonomic design, and provides highly accurate and durable measurement. It is designed for tough inspection environments, and delivers precise measurement results.
Thermotron offers combined environment test chambers, which are available in temperature or temperature/humidity configurations.
The LFA 467 HyperFlash® from NETZSCH is a light flash apparatus offering unique dimensions in the measurement of thermal diffusivity and conductivity.
The POROMETERS 3G micro, 3G macro, 3Gz and 3Gzh are latest generation capillary flow porometers. Using the technique known as liquid expulsion, they measure pore size distributions and other related information of through-pores.
The MET ONE HHPC 3+ (0.3µm) is developed for contamination sensitive industrial environments where 0.3µm sensitivity is desired for troubleshooting HEPA filtered workstations as well as clean-room spot checks.
The new dilatometer DIL 402 Expedis Classic represents a robust and easy-to-use all-in-one instrument. All instruments of the DIL Expedis series feature the revolutionary NanoEye measuring cell; a new dimension in measuring range and accuracy.
The Multisizer 4 is the newest member of the COULTER COUNTER product family and the latest advancement in a long line of particle counting and sizing instruments. The Multisizer 4 features the latest advances in digital technology and user-friendly software controlled by an external PC using Microsoft Windows*-based software. High-speed digitalization of the signal allows the use of various pulse parameters for more accurate particle characterization.
These asphalt permeameters are compact, self-contained, easy-to-use units, which can be used in the lab or in the field.
The PoreMaster series consists of three automatic mercury intrusion porosimeters offering new concepts in automated pore size analysis.
The ADMET eXpert 2600 series dual column testing machines tackle the toughest tests with their superior axial alignment, stiffness, and crosshead guidance. A simple design allows for lower cost, faster delivery, and years of maintenance free operation. All eXpert systems are capable of performing compression tension, and flexure tests.
The SilverSchmidt ST/PC is the first integrated concrete test hammer featuring true rebound value and unmatched repeatability. Two factors contribute to the improved performance of this concrete test hammer over its predecessors.
Micromeritics’ ASAP 2020 Accelerated Surface Area and Porosimetry analyzer uses the gas sorption technique to generate high-quality data for research and quality control applications. Available options include the micropore option, the high-vac option, and the chemisorption option, which uses the static volumetric technique to determine the percent metal dispersion, active metal surface area, size of active particles, and surface acidity of catalyst materials.
THEMOS mini is a thermal emission microscope which is designed by Hamamatsu. It is suitable for indicating the occurrence of failures in the semiconductor device by displaying the detected thermal image superimposed onto the pattern image.
Oxford Instruments has developed the PlasmaPro1000 Astrea large batch etch system designed for use in harsh operating environments such as LED applications.
Imetrum has introduced a new non-contact video extensometer, the Universal Video eXtensometer (UVX), which integrates the accurate measurement capabilities of the UVX-Flexi extensometer with a simple and easy to use design to allow high-volume testing of composite materials.
Hiden Isochema's IGA-002 gravimetric analyzer is designed to analyze the general vapor sorption processes under vacuum conditions. It features all the components of the IGA-001 model in addition to anti-condensation protection feature rated to 50°C and low range pressure sensor.
The Kinexus ultra+ rheometer available from Malvern Instruments includes the widest torque range and highest sensitive air bearing.
The ZetaScan is a fully automated 300mm capable defect inspection tool capable of addressing a range of substrates such as polished, unpolished, transparent, opaque, rough ground substrates and touch panels.
The Zeta-20 enables analysis and imaging of surface characteristics on all kinds of samples, namely low reflectivity to high reflectivity, smooth to rough and transparent to opaque based on the proprietary ZDot™ technology.
LSM 710 NLO and LSM 780 NLO are suitable for multiphoton imaging. The 32-channel internal detector is used for simultaneously detecting spectral emission signals of the multi-labeled sample.
The TG 209 F1 Libra thermobalance allows you to measure mass change of materials as a function of temperature in the range 10-1100°C. The instrument has been designed for ease of use and to protect delicate components to ensure minimum down time.
The VISCOpro 1600 viscometer is a compact workhorse instrument for applications where minimal operator involvement is desired.
The CMP 6 pyranometer is intended for routine global solar radiation measurement research on a plane or level surface. It is completely compliant with ISO 9060:1990 specification for a First Class pyranometer and features a sixty-four thermocouple junction (series connected) sensing element.
The Orion III Plasma Enhanced Chemical Vapor Deposition (PECVD) system from Trion Technologies produces production-quality films on a compact platform. The unique reactor design produces low stress films with excellent step coverage at extremely low power levels.
VTS offers five low cost systems in the 40 to 150 lbf range. Permanent magnetic fields are featured in the vibrators from 40 lbf to 100 lbf peak sine force.
The Mecline is a multiple diameter laser micrometer system, specifically designed to check parts machined on N.C. lathes or to be used in automatic inspection equipment, where robot handling devices move the component to selected gauging positions.
The U-2900 is a double-beam spectrophotometer offering high performance, ease of use, and reliability.
Hanatek offers an advanced melt flow indexer that can be used for measuring the melt properties of thermoplastic polymers.
ZeGage™ is the ideal non-contact optical profiler for quantitative measurements of 3D form and roughness on precision machined surfaces. The industrial design provides fast, accurate metrology in a compact, cost-effective package that can be located directly on the factory floor without the need for vibration isolation or specialized enclosures.
Contour Elite™ 3D optical microscopes from Bruker are designed with the ContourGT® platform’s industry-leading metrology and Vision64® analysis software, which is capable of high-fidelity imaging.
Dynisco offers LMI 4000, an advanced melt flow indexer which uses a 32-bit microprocessor to provide digital calibration, self-diagnostics and test parameter control.
The Intra series offers precision shop floor solutions for surface finish and contour measurement. There are two versions in this series - Intra Touch and Intra Ultra.
The AS-200 Scott Volumeter available AimSizer Scientific is a standard bulk density tester that is widely utilized in powder testing applications.
This sophisticated, flexible wafer metrology system combines a MicroEpsilon profilometer with a high-performance, high-resolution vision system and laser interferometers to detect and measure laser-cut features on one side of a wafer relative to features on the other side of the wafer.
The XL7 Polymer series viscometers are specifically designed for melt-pipe extruder applications. These viscometers provide continuous real-time dynamic viscosity of melts. Their special high-load construction allows uninterrupted duty under high temperature, pressure and viscosity conditions with virtually no maintenance.
The NanoPhotometer is designed to provide the utmost flexibility in photometry. The outstanding technology combines ultra low and standard volume applications for improved concentration measurement and estimation of purity in one UV/Vis spectrophotometer.
The WT-2000PVN is a tabletop measurement system, capable of performing a variety of measurements on PV cells, wafers, and blocks. The base system includes the overhead functions, and you configure the measurement capabilities to match your specific needs.
Bruker’s LumiMap Electroluminescence System is a reliable and accurate metrology system and designed for HB-LED epitaxial inspection for R&D and production.
The Parsum IPP 70 S is lightweight, compact and can be installed easily. The probe offers in situ, real-time size and velocity measurements for solid particles up to 6000 µm in size.
Using a unique laser scanning approach developed by United Calibration Corporation, the United Laser Extensometer permits accurate non-contact extension measurement from the start of the test through sample failure without test interruption.
The IGAsorp-HT from Hiden Isochema is a device used for moisture sorption measurements at different temperatures.
The DektakXT™ Stylus Profiler from Bruker has an innovative design enabling a consistency better than 4Å.The key milestone in the performance of the stylus profiler is due to 40 years of Dektak® innovation and industry leadership.
Equipped with a power digital closed-loop controller, ADMET’s Micro EP is a mini tester that can also adapt to many microscope stages. Micro EP models are available with force capacities to 5kN (1,125 Lb), optional crosshead strokes, testing speeds, thermoelectric heaters and coolers.
The 3575AVG extensometers from Epsilon are capable of measuring r-values in sheet metal testing. These extensometers average the lateral strain at two locations. They are basically strain gaged devices, making them suitable for use with any electronics designed for strain gaged transducers.
MicroSense has launched an advanced sapphire wafer metrology system that is capable of measuring sapphire wafers with any surface finish with high repeatability and high throughput.
MTI Instruments offers Proforma 300SA, a semi-automated metrology system employed in thickness measurement for semi-insulating and semiconducting wafer materials.
The moisture analyzer MM500 offers accurate moisture measurement in process gas analysis.
PCB manufacturers are developing denser and small features on highly thin high-density interconnect (HDI) and multi-chip module (MCM) substrates.
The P/ACE™ MDQ capillary electrophoresis instrument is a CE-based analytical system configured optimally for the methods development process, where a focus is placed on spectral analysis and the automation of separation strategies.
The COUNT-WISE IMB combines high speed counting with multi-batching to give you the speed and flexibility you need to compete in today's market. With the touch pad user interface and large back lit display, you can view and edit your batch amounts during any stage of the job with the touch of a button!
The three sizes of Shear Cell modules for the FT4 Powder Rheometer allow the shear properties of powders to be measured. Using a shear cell on the high-specification FT4 platform allows the automatic generation of accurate and reproducible shear information which complements the dynamic flow date.
The Aquadyne DVS is a fully automated, gravimetric, dual sample water vapor sorption analyzer. It measures adsorption and desorption isotherms of water vapor both accurately and sensitively, including sorption kinetics, with minimal operator involvement. The weight(s) of one or two sample(s) is/are constantly monitored and recorded as the relative humidity is automatically varied by the blending of dry carrier gas with a saturated gas stream.
The Computrac MAX® 4000XL offers rapid, reliable and precise results. This enhances the ability to monitor or adjust processes ensuring quality products while reducing waste, energy requirements and man-hours.
Profile360 is a real-time, in-line, non-contact measurement system for continuous monitoring of key profile dimensions in complex shapes such as rubber, ceramic, plastic, and wood-plastic composite extrusions, roll-formed metal profiles, and profiled wire.
The micro-gloss has been an excellent industry standard in gloss measurement for several years.
When there is a simulation system of components or a process line that is critical to operations, it is essential to know that the viscosity parameters are correct or controlled always.
In recent years, research efforts in nanotechnology have focused on easy-to-use tools for characterizing nanoparticles.
The IGA series from Hiden Isochema are advanced analyzers for sorption science. IGA instruments are based on the gravimetric method and provide precise measurements of the dynamics and magnitude of gas and vapor sorption on materials.
BT Technology offers two types of melt flow systems, which can be employed to determine the flow characteristics of a variety of polymers.
Labthink’s i-Hydro 7300 water vapor transmission rate tester, operated on gravimetric method, is used for testing water vapor transmission rate of sheeting, building materials, composite films, pharmaceutical materials and plastic films.
The Tinius Olsen DG Series of digital compression testers features highly robust frames for exceptional stability during testing of cubes or concrete cylinders.
The Tinius Olsen FA Series of digital compression testers features strong frames for high stability while testing cubes or concrete cylinders.
Hamamatsu offers the iPhemos-SD Inverted Emission Microscope which is suitable for docking with different types of testers.
The Zeta-560 from Zeta Instruments is a completely automated wafer metrology system that can process 6 or 8in wafers. The system caters to a number of applications including wafer bow, film thickness, etch depth, roughness and bump height.
Hiden Isochema’s IMI series are multifunctional instruments for the analysis of chemisorption, physisorption, and gas absorption by materials, from basic level manometric analyzers to advanced multistream dynamic flow units with integrated mass spectrometry.
Oxford Instruments’ PlasmaPro 80 Stratum is a compact open-loading tool designed specifically for plasma enhanced chemical vapour deposition (PECVD).
The Tristar II 3020 provides high-quality surface area and porosity measurements on solid materials by using the technique of gas adsorption. The TriStar II is a fully automated, three-station analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements.
Pull-off testing is one of the most widely used test methods in the construction industry. The DY-2 family of automated pull-off testers can be used for all pull-off applications.
The XHS-13 Fogging Tester from XingHua Instruments is designed to determine the fogging characteristics of automotive interior trim, textiles, plastic and leather.
The Z2 COULTER COUNTER is the latest addition to the Z™ Series COULTER COUNTER. In addition to reporting both count and concentration results, the Z2 adds the ability to provide size distribution of the cell population.
The NOVA e-Series of surface area analyzers offers a full line of rapid, high throughput B.E.T. surface area and pore size analyzers. Eight fully automatic models meet the needs of any research or quality assurance laboratory.
The DT-1201 AcoustoPhor Acoustic & ElectroAcoustic Spectrometer measures both particle size and zeta potential of concentrated colloids, suspensions and emulsions. It offers unparalleled analytical capabilities for advanced dispersion characterization of even complex sample types at process concentrations.
The DynaPro® Plate Reader II is designed to perform high-throughput, automated dynamic light scattering (DLS) measurements on macromolecular and nanoparticle samples.
The Signatone QuadPro Process Development Resistivity System is available in both manual and automatic 8" and 12" systems. The manual system includes a ball bearing stage and can be upgraded at a later time to add auto-stepping capability. The automatic systems are motorized and can automatically step through 9, 25, 49, or 121 test points on wafers of size 100 mm, 125 mm, 150 mm, 200 mm, or 300mm.
Improve the reliability and throughput of your robotic wafer handling systems with the next generation wafer mapping sensors from MultiMetrixs. The most technically advanced and cost effective range of wafer mapping sensors on the market today.
MeltFloW offers four models of melt index testers. The MeltFloW basic is a manual melt index tester specifically designed for measuring the melt flow rate (MFR) values in g/10 min.
The Phantom III RIE (reactive ion etch system) is designed to supply research and failure analysis laboratories with state-of-the-art plasma etch capability using single wafers, dies or parts using fluorine and oxygen based chemistries.
The MicroClimate® 3 is a compact environmental chamber developed for simulating a complete range of humidity and/or temperature conditions.
Epsilon MODEL 3543 is a long gauge length extensometer with gauge lengths of 50mm and more and measuring ranges of up to 100mm. This extensometer is ideally suited for testing of long samples such as wire materials, weld joints, steel re-bars.
Retsch offers an optical particle analyzer called CAMSIZER, which is used for concurrent measurement of particle shape, particle size distribution, and supplementary parameters of granules and powders.
The Phemos-200 developed by Hamamatsu is an emission microscope which consists of a high-resolution, cooled CCD camera with a pixel of about 1024×1024.
HORIBA’s LA-960 particle size analyzer has an innovative design and supports advances in scientific knowledge through exceptional accessories, intuitive software, and high performance.
Hiden Isochema’s XEMIS is a high accuracy sorption microbalance for accuracy weighing in extreme environments.
The 3548COD high temperature furnace COD gages from Epsilon are used in split type materials testing furnaces with a slot for the ceramic rods. They are strain gaged devices, making them suitable for use with any electronics designed for strain gaged transducers.
The Gemini VII 2390 Series of surface area analyzers available from Micromeritics are low-cost and simple-to-use instruments that can instantly create precise results on surface area and porosity.
The Electro-Optics Group specializes in designing and producing advanced electro- optical assemblies and products that are utilized in a number of markets, such as defense, industrial, life sciences and semiconductor industries.
MODEL 3541 fracture mechanics clip-on gages are compliant with standard test methods like ASTM E1820 for determining the fracture toughness characteristics of metallic materials.
The CCI UHSM is an innovative instrument that is designed to handle ultra high speed piezo-less 3D profiling. The proper functioning of a component depends on three elements of surfaces – dimension, form and texture.
Ten thousands of ODAC® measuring heads have been in use successfully for over 30 years. From international conglomerates to the small manufacturing company, ODAC® instruments are being used in multiple industries, contributing to their financial success and continuously adding to a comprehensive reference list.
Nordson MARCH's FlexVIA™ Plasma System is a complete self-contained vacuum plasma system that provides a low-cost treatment of flexible materials with excellent efficiency.
The FRITSCH ANALYSETTE 22 laser particle sizer ensures precise determination of particle sizes in the range of 1 nm - 2000 μm in production and quality control as well as in research and development.
The easy-to-use, stand-alone digital ultrasonic pipe wall thickness gauge is an indispensable tool in accurate clamp-on ultrasonic flow measurement.
Dynamic Testing Systems and Flexometer for high forces. The GABOMETER® series consist of 2 testing systems with maximum forces up to 2000 N and 4000 N.
The XLS (eXactum Laser Scan Micrometer) series Laser Gauges represent the latest technological development in laser scanning micrometry, featuring record performance.
The SATRA Bally flexometer is the internationally-accepted method for the assessment of the flexing endurance of light leathers and their surface finishes.
TA Instruments offers the Q5000SA dynamic vapor sorption analyzer for high-performance sorption testing of materials under controlled conditions of humidity and temperature.

The AST-100 is the world's most innovative means of viscosity control. The AST-100 is a versatile instrument that is excellent for customers who are looking for viscosity control (i.e. maintaining the viscosity of the product) in their process more than the measurement of an exact number (ex. 23.5cP). It is easy to install, cleans-in-place, and has no moving parts, so maintenance is minimal. With available options it is suitable for explosion-proof applications or 3A food-grade applications as well.